22.01.2015 Views

this SIM5218 AT command manual - Cooking Hacks

this SIM5218 AT command manual - Cooking Hacks

this SIM5218 AT command manual - Cooking Hacks

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>SIM5218</strong> Serial <strong>AT</strong> Command Set<br />

4.15 <strong>AT</strong>+CR Service reporting control<br />

Description<br />

Write <strong>command</strong> controls whether or not intermediate result code “+CR: ” is returned from<br />

the TA to the TE. If enabled, the intermediate result code is transmitted at the point during connect<br />

negotiation at which the TA has determined which speed and quality of service will be used, before<br />

any error control or data compression reports are transmitted, and before the intermediate result<br />

code CONNECT is transmitted.<br />

SIM PIN References<br />

YES 3GPP TS 27.007<br />

Syntax<br />

Test Command<br />

<strong>AT</strong>+CR=<br />

Read Command<br />

<strong>AT</strong>+CR<br />

Write Command<br />

<strong>AT</strong>+CR=<br />

Execution Command<br />

<strong>AT</strong>+CR<br />

Responses<br />

+CR: (list of supported s)<br />

OK<br />

Responses<br />

+CR: <br />

OK<br />

Responses<br />

OK<br />

Responses<br />

Set default value:<br />

OK<br />

Defined values<br />

<br />

0 – disables reporting<br />

1 – enables reporting<br />

<br />

ASYNC asynchronous transparent<br />

SYNC<br />

synchronous transparent<br />

REL ASYNC asynchronous non-transparent<br />

REL sync synchronous non-transparent<br />

GPRS [] GPRS<br />

The optional proposes a layer 2 protocol to use between the MT and the TE.<br />

Examples<br />

<strong>AT</strong>+CR<br />

<strong>SIM5218</strong>_Serial _<strong>AT</strong>C_V1.36 55<br />

5/15/2012

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!