PT-600 Mechanized Plasma Cutting Torch
PT-600 Mechanized Plasma Cutting Torch
PT-600 Mechanized Plasma Cutting Torch
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SECTION 1<br />
SAFETY<br />
1.3 General Safety Information<br />
!<br />
WARNING<br />
<strong>Cutting</strong> Machine starts automatically.<br />
This torch may be mounted on a mechanized cutting<br />
machine. This equipment moves in various directions<br />
and speeds and may start automatically.<br />
• Moving machinery can crush.<br />
• Only qualified personnel should operate or service<br />
equipment.<br />
• Keep all personnel, materials, and equipment not<br />
involved in production process clear of entire<br />
system area.<br />
• Keep gear racks and rails clear of debris or<br />
obstructions, such as tools or clothing.<br />
• Fence off entire work cell to prevent personnel<br />
from passing through area or standing in the<br />
working envelope of the equipment.<br />
• Post appropriate WARNING signs at every work<br />
cell entrance.<br />
• Follow lockout procedure before servicing.<br />
!<br />
WARNING<br />
Failure to follow operating instructions<br />
could result in death or serious injury.<br />
Read and understand this operator’s manual before<br />
using machine.<br />
• Read entire procedure before operating or<br />
performing any system maintenance.<br />
• Special attention must be given to all hazard<br />
warnings that provide essential information<br />
regarding personnel safety and/or possible<br />
equipment damage.<br />
• All safety precautions relevant to electrical<br />
equipment and process operations must be<br />
strictly observed by all having system<br />
responsibility or access.<br />
• Read all safety publications made available by<br />
your company.<br />
1-2