PT-600 Mechanized Plasma Cutting Torch
PT-600 Mechanized Plasma Cutting Torch
PT-600 Mechanized Plasma Cutting Torch
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SECTION 4<br />
OPERATION<br />
CUTTING PARAMETERS FOR THE ESP-1000<br />
The <strong>PT</strong>-<strong>600</strong> is a mechanized plasma cutting torch designed for cutting without water injection. <strong>Cutting</strong> can be performed<br />
using air, oxygen, nitrogen or H-35 as the cut gas at currents ranging from 50 to 360 amperes. Underwater cutting can be<br />
performed with the <strong>PT</strong>-<strong>600</strong> by using an Air Curtain at 150 amps or higher. Refer to F15-475 for Air Curtain information.<br />
<strong>Torch</strong> Sleeve<br />
<strong>Torch</strong> Body<br />
Gas Baffle<br />
see chart<br />
O-ring (supplied with electrode holder)<br />
Electrode Holder - 37068<br />
O-ring (supplied with electrode)<br />
Electrode<br />
see chart<br />
O-ring (supplied with nozzle)<br />
Nozzle Assembly<br />
see chart<br />
O-ring (supplied with nozzle)<br />
Nozzle Retainer Cup - 37082<br />
Diffuser<br />
see chart<br />
Shield<br />
see chart<br />
Shield Retainer - 37081<br />
<strong>PT</strong>-<strong>600</strong> Components<br />
4-110