PT-600 Mechanized Plasma Cutting Torch

SECTION 4
OPERATION
4.4.2 Aluminum and Process Gases
Material Thickness: .188 through 1.00 inches
Cut Qualities: Good
Start Gas:
Plasma:
Shield:
Air
Air
Air
Discussion: Dark cut face, potential dross, good cut angles
Material Thickness: .250 through 3.000 inches
Cut Qualities: Good
Start Gas:
Plasma:
Shield:
N 2
H-35
N 2
Discussion: Smooth cut face, virtually dross free up to 1.5 in. thick , cut angles slightly larger
with top edge rounding
Material Thickness: .625 through 1.000 inches
Cut Qualities: Good
Start Gas:
Plasma:
Shield:
N 2
H-35
Air
Discussion: Slightly darker cut Face, virtually dross, cut angles slightly larger with top edge
rounding
Material Thickness: .625 through 1.5
Cut Qualities: Good
Start Gas:
Plasma:
Shield:
H-35
H-35
Air
Discussion: Slightly darker cut Face, virtually dross, cut angles slightly larger with top edge
rounding
Material Thickness: .188 through 1.500 inches
Cut Qualities: Good
Start Gas:
Plasma:
Shield:
N 2
N 2
Air
Discussion: Darker cut face, dross could be formed above 1 in. material, good cut angles,
slight top edge rounding.
Material Thickness: .062 through 1.000 inches
Cut Qualities: Good
Start Gas:
Plasma:
Shield:
N 2
N 2
N 2
Discussion: Darker cut face, dross could be formed above .75 in. material, good cut angles,
slight top edge rounding.
4-10