PT-600 Mechanized Plasma Cutting Torch

SECTION 2
DESCRIPTION
2.4 PT-600 Technical Specifications
2.4.1 Plasma Gas Technical Specifications
Type O 2
, N 2
, Air, H-35
Pressure
100 to 125 psig (6,9 – 8,6 bars)
250 cfh (118 l/min) max. at 600A
Flow
(varies with application)
O 2
-99.5%
N
Purity Required*
2
-99.995%
H-35 Specialty gas
Air-clean, dry and oil free
Recommended Liquid Cylinder Service Oxygen: R-76-150-540LC (P/N 19777)
Regulators
Inert gas: R-76-150-580LC (P/N 19977)
Oxygen: R-77-150-540 (P/N 998337
Hydrogen/Methane:R-77-150-350 (P/N
Recommended Cylinder 2-Stage 998342)
Regulators
Nitrogen: R-77-150-580 (P/N 998344)
Industrial Air: R-77150-590 (P/N
998348)
Recommended Heavy –Duty Hi-flow
Oxygen: R-76-150-024 (P/N 19151)
Station or Pipeline Regulators
Recommended High-capacity Station
R-6703 (P/N 22236)
or Pipeline Regulators
Gas Filter Required 25 micron w/bowl guard (P/N 56998133)
2.4.2 Start Gas Technical Specifications
Type N 2
, Air, H-35
Pressure
100 to 125 psig (6,9 – 8,6 bars)
Flow
250 cfh (118 l/min) max @ 600A
(varies with application)
Minimum Purity Required 99.995% clean, dry, oil free
2.4.3 Secondary Gas Technical Specifications
Type
2-2
N 2
, Air
Pressure
100 to 125 psig (6.9 – 8,6 bars)
Flow
485 cfh (228,9 l/min) max (varies with
application)
Minimum Purity Required
99.995% clean, dry, oil free (Same source as
start gas)
Gas Filter Required 25 micron w/bowl guard (P/N 56998133)
2.4.4 PT-600 Torch Technical Specifications
Type
Rating
Dimensions
Water-Cooled, Dual Gas
600 amps @ 100 % duty cycle
See Package Options (2.3). This section.