DLI Implementation and Reference Guide - Datalogics

Working with Content 8.17
operation. If the end position specified is identical the current position, no segment
will be appended, and no notice will be given (Optimization).
dlpdfpathaddcurvey
This method accepts five parameters:
• The first is a pointer to a path.
• The second and third are the X and Y positions of a point which will be used for
Control Point 1.
• The fourth and fifth are the X and Y positions of the end point of the curve.
A smooth curve (a cubic Bézier) will be drawn from the current position to the end
position, under direction of the two control points. Control Point 2 is the end
position. The current position will be the end position of the line at completion of this
operation. If the end position specified is identical to the current position, no segment
will be appended, and no notice will be given (Optimization).
dlpdfpathaddrect
This method accepts five parameters:
• The first is a pointer to a path.
• The second and third are the X and Y positions of a point which will be one corner
of the box.
• The fourth will be the width of the box.
• The fifth will be the depth of the box.
If the specified position is not the current position, a MoveTo to the specified position
will be made. A rectangle will be added to the path, starting at the specified position