DLI Implementation and Reference Guide - Datalogics

A.86 DLI Reference Guide
Technical Notes
1 As of DLI v3.0.11, a value of 0 is now accepted for the Width and Depth
parameters. If Concepts either is 0, and the Facilities: PDF page's Guide crop box to the is used DL to Pager form Composition the System
DLPDFIMAGE's visible region. This will be shifted using the XDisp and YDisp
values to generate the imported image.
2 Datalogics recommends supplying a value of 0 for the width, depth, and x- and y-
displacements, unless it is otherwise known that the imported graphic should be
placed with a visible region other than that visible in Adobe Acrobat or Reader.
3 The BoundingBox in the returned DLPDFIMAGE is not rotated by the value of the
Rotate key for the imported page, and thus can be used to determine the "real"
width and depth of the imported PDF image.