TAINY GMOD - Dr. Neuhaus Telekommunikation GmbH

Parameter Explanation, configuration options
DESTPORT
SOURCEPORT
CONNECT_ATTEMPTS
Configuring the TAINY GMOD-Sx
Destination port number:..............................................................
(Standard: 26862)
The port specified here must correspond to the one via which
the server communicates – TSC/TMS or TAINY
ComPortServer. The port used by the server is set ex factory to
26862. Only if you know that a different number is set on the
server for communication with the TAINY GMOD-Sx should
you enter this different port number here.
A port number higher than 20000 should be selected in any
case in order to avoid selecting a port number already in use
by other applications. See also RFC 1700 (RFC (= Request
For Comments) denotes a numbered series of documents on
Internet standards.)
Max. value: 65535
Local port number:........................................................................
(Default: Assign local port number automatically) Specifies the
port via which the TAINY GMOD-Sx communicates.
This port number should really only be changed if the firewall of
the server on which the TSC/TMS or the TAINY
ComPortServer is installed recommends doing so.
Max. value: 65535
A port number higher than 20000 should be selected in any
case in order to avoid selecting a port number already in use
by other applications. See also RFC 1700 (RFC (= Request
For Comments) denotes a numbered series of documents on
Internet standards.)
Connection attempts:.....................................................................
(Default: 5) Defines the number of socket connection attempts
made by the TAINY GMOD-Sx to establish a connection to the
server.
Permissible values: 1 to 999
TAINY GMOD-Sx 43 von 84