TAINY GMOD - Dr. Neuhaus Telekommunikation GmbH

Configuring the TAINY GMOD-Sx
6.4 Saving the Parameter Settings in a File / Fetching Them From a File
You can also store the settings for the TAINY GMOD-Sx in a file on the service PC. You
can then access the stored settings if you want to parameterise several
TAINY GMOD-Sxs.
Saving the settings To do this proceed as follows:
in a file
1. Execute the configuration program TAINY GMOD-SxConfig.
2. Specify the applicable parameters in the tabs, orienting yourself
to your notes in the parameter table – see
on page 38.
OR
Read the current settings out of the connected TAINY GMOD-
Sx: click on Read parameters from GMOD-Sx in the
Parameters menu. (In this case the service PC must be
connected to the TAINY GMOD-Sx’s interface COM and the
TAINY GMOD-Sx must be switched to service mode.)
3. In the Parameters menu click on Store parameters to file.
Define the file name and the folder.
Fetching settings
from a file and
loading them into
the TAINY GMOD-
Sx
To do this proceed as follows:
1. Connect the service PC to the TAINY GMOD-Sx.
Switch the TAINY GMOD-Sx to service mode by pressing the
service button (longer than 1 second, max. 3 seconds).
Execute the configuration program TAINY GMOD-SxConfig.
Important: Do not click on the Read parameters from GMOD-
Sx command!
2. In the Parameters menu click on Read parameters from a
file.
Select the appropriate file.
Effect:
The configuration program TAINY GMOD-SxConfig displays
the parameter values read in from the file.
3. If necessary change the displayed settings.
4. In the Parameters menu click on Store parameters to GMOD-
Sx.
Effect:
The configuration program transfers the settings into the
device.
TAINY GMOD-Sx 67 von 84