TAINY GMOD - Dr. Neuhaus Telekommunikation GmbH

The Firmware of the TAINY GMOD-Sx
10 The Firmware of the TAINY GMOD-Sx
The firmware contains the fundamental programming of the TAINY GMOD-Sx. If the
manufacturer has produced new firmware, for example to equip the device with new
functions, then this can be loaded into the TAINY GMOD-Sx.
Compare the firmware version with that of your TAINY GMOD-Sx.
How you determine the version of the firmware in your TAINY GMOD-Sx is described in
the chapter Displaying Device and Status Information, section "
" on page 73.
Updating the
firmware
Prerequisites:
• The configuration program TAINY GMOD-SxConfig is installed
on the PC which you wish to use to update the firmware.
• The firmware file is on the service PC.
Proceed as follows:
1. Connect the service PC to the TAINY GMOD-Sx.
Switch the TAINY GMOD-Sx by pressing the service button
(longer than 1 second, max. 3 seconds).
2. Execute the configuration program TAINY GMOD-SxConfig on
the service PC. Start it as follows insofar as the specifications
have been taken over during installation of this program:
In the Start menu select Programs, Neuhaus, TAINY GMOD-
Sx, TAINY GMOD-SxConfig
3. In the New firmware menu click on Store new firmware into
GPRS-RS232.
Select the firmware file stored on your computer to transfer it
into the TAINY GMOD-Sx.
The transfer process can take several minutes.
76 von 84 TAINY GMOD-Sx