TAINY GMOD - Dr. Neuhaus Telekommunikation GmbH

Parameter Explanation, configuration options
[SERVICE_IF]
BAUDRATE
[REMOTE_SERVICE
_ACCESS]
SERVICE_CLIP_0
SERVICE_CLIP_1
SERVICE_CLIP_2
SERVICE_CLIP_3
SERVICE_CLIP_4
Configuring the TAINY GMOD-Sx
changes will be passed to the TAINY GMOD-Sx by the
configuration program with the next setting of the parameters.
Only when the new user name and/or the new password are
activated in the TAINY GMOD-Sx following a restart does the
device query them from the connected service PC when it dials
in again.
� When changing the user name and password make absolutely
sure that this change is at the same time also made for the
dial-up connection used. See also page Properties tab. You
can find step-by-step instructions for changing the user name
and password in Changing the user name and password of the
TAINY GMOD-Sx service interface on page 66.
Baud rate:......................................................................................
(Default: 57600) This defines the speed with which the
TAINY GMOD-Sx communicates with the PC connected to its
service interface.
(The character format is set to 8N1 and cannot be changed.)
Permissible values for the baud rate:
9600, 19200, 38400, 57600 and 115200
If you want to change the value use the selection list.
Remote Service
Phone number 1……………………………………………………
Phone number 2……………………………………………………
Phone number 3……………………………………………………
Phone number 4……………………………………………………
Phone number 5……………………………………………………
Phone numbers (CLIP) of remote stations from which
TAINY GMOD-Sx will accept incoming GSM data calls for remote
TAINY GMOD-Sx 59 von 84