TAINY GMOD - Dr. Neuhaus Telekommunikation GmbH

Displaying Device and Status Information
9 Displaying Device and Status Information
Viewing device
information and
connection
statistics using
GPRS-
RS232ConfigTSC
Prerequisites:
• The configuration program TAINY GMOD-SxConfig is installed
on the PC which you wish to use for this purpose.
Proceed as follows:
1. Connect the service PC to the TAINY GMOD-Sx.
Switch the TAINY GMOD-Sx to service mode by pressing the
service button (longer than 1 second, max. 3 seconds).
2. Execute the configuration program TAINY GMOD-SxConfig on
the service PC. Start it as follows insofar as the specifications
have been taken over during installation of this program:
In the Start menu select Programs, Neuhaus, TAINY GMOD-
Sx, TAINY GMOD-SxConfig
3. Click on View GMOD-Sx web pages in the Info menu.
Effect:
The configuration program starts the service PC's Web
browser. This then displays the start page of the HTML pages
stored in the TAINY GMOD-Sx:
�
By clicking on the appropriate hyperlink you can have the
corresponding HTML page displayed in the browser.
When you have viewed the required data, switch the
TAINY GMOD-Sx back to normal operating/application mode
by again pressing the service button (longer than 1 second,
max. 3 seconds).
72 von 84 TAINY GMOD-Sx