TAINY GMOD - Dr. Neuhaus Telekommunikation GmbH

Configuring the TAINY GMOD-Sx
Parameter Explanation, configuration options
[CSD_CONFIG]
CSD_DIAL_STRING
[CSD_CONFIG]
USER
PASSWORD
[CSD_CONFIG]
DNS1
DNS2
CSD phone number:......................................................................
User name........................... ....................................................
Password........................................................................................
If the TAINY GMOD-Sx is configured such that it also or only
establishes the connection per dial-up connection via the
mobile radio network into the Internet to the communication
partner, then set the number of the desired Internet service
provider or RAS server here and the required user name and
password.
INFO:
For the Internet: You can find the number, user name and
password in the documentation from your Internet service
provider. In the case of call-by-call Internet accesses this data
is usually also published on the providers' Internet pages.
For RAS servers: Ask the system administrator for the connection
data
DNS1:.......................................................................................
DNS2:.......................................................................................
The IP addresses of the Domain Name Servers of the Internet
access used. This is only required if the TAINY GMOD-Sx uses
the host name (URL) rather than the IP address for the
addressing during data transmission to the TAINY
SwitchingCenter OR ComPortServer. See GPRS: Fixed /
known IP address of the communication partner (TAINY
SwitchingCenter / ModemServer or TAINY ComPortServer),
page 12).
If your Internet service provider only has 1 DNS then leave the
field for the 2nd DNS empty.
INFO: You can find the IP addresses of DNS1 and DNS2 in the
documentation from your Internet service provider or on
his Internet page or via his hotline.
52 von 84 TAINY GMOD-Sx