TAINY GMOD - Dr. Neuhaus Telekommunikation GmbH

Log File: Connection Statistics for the Current Connection
8 Log File: Connection Statistics for the Current Connection
The TAINY GMOD-Sx records the details of all GPRS connections in the log file. Only
when the memory capacity of 20 KB is fully used are the old data overwritten by new
data.
Viewing the log file Prerequisites:
• The configuration program TAINY GMOD-SxConfig is
installed on the PC which you use to view the log file of the
TAINY GMOD-Sx.
Proceed as follows:
1. Connect the service PC to the TAINY GMOD-Sx.
Switch the TAINY GMOD-Sx to service mode by pressing the
service button (longer than 1 second, max. 3 seconds).
2. Execute the configuration program TAINY GMOD-SxConfig on
the service PC. Start it as follows insofar as the specifications
have been taken over during installation of this program:
In the Start menu select Programs, Neuhaus, TAINY GMOD-
Sx, TAINY GMOD-SxConfig
3. In the Log file menu click on View log file.
Effect:
The configuration program loads the log file from the
TAINY GMOD-Sx into the PC and displays the set parameters.
4. Switch the TAINY GMOD-Sx back to normal
operating/application mode by again pressing the service
button (longer than 1 second, max. 3 seconds).
You can also view the statistics of all GPRS connections. To do this please refer to the
chapter Displaying Device and Status Information.
TAINY GMOD-Sx 71 von 84