TAINY GMOD - Dr. Neuhaus Telekommunikation GmbH
TAINY GMOD - Dr. Neuhaus Telekommunikation GmbH
TAINY GMOD - Dr. Neuhaus Telekommunikation GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Configuring the <strong>TAINY</strong> <strong>GMOD</strong>-Sx<br />
Parameter Explanation, configuration options<br />
[CSD_CONFIG]<br />
ATD_PREFIX<br />
[REMOTE_COM<br />
_ACCESS]<br />
COM_CLIP_0<br />
COM_CLIP_1<br />
COM_CLIP_2<br />
COM_CLIP_3<br />
COM_CLIP_4<br />
Outgoing GSM data calls<br />
Dial prefix<br />
(Default #) Specifies the character used to determine that the<br />
call to be set up is a GSM data call to another Modem in the<br />
GSM or analogue network.<br />
Example:<br />
When receiving the dialling command with the defined prefix<br />
(e.g. ATD#), <strong>TAINY</strong> <strong>GMOD</strong>-Sx recognizes<br />
that a call to a traditional modem is to be set up. The TCP/IP<br />
protocol will not be used.<br />
Permissible values: max. 10 characters, digits 0 up to 9, A,<br />
B, C, D, E, F, *, #, no blanks<br />
Incoming calls<br />
Phone number 1 ……………………………………………………<br />
Phone number 2 ……………………………………………………<br />
Phone number 3 ……………………………………………………<br />
Phone number 4 ……………………………………………………<br />
Phone number 5 ……………………………………………………<br />
Phone numbers (CLIP) of remote stations from which<br />
<strong>TAINY</strong> <strong>GMOD</strong>-Sx will accept incoming GSM data calls for the<br />
COM interface.<br />
Default: * (all incoming GSM data calls are permissible,<br />
provided that they are not admissible for remote<br />
service).<br />
Permissible values: max. 30 characters, digits 0 to 9, +, *<br />
� <strong>TAINY</strong> <strong>GMOD</strong>-Sx first checks if an incoming GSM data call is<br />
admissible for remote service. Only if the remote station is not<br />
specified for service access does it check if the call is<br />
56 von 84 <strong>TAINY</strong> <strong>GMOD</strong>-Sx
Change language