MART Vol. II MO/MP - NESA - Civil Air Patrol

GX-55From the DB (Database) screen, turns the large knob until “Create UserWaypoint by Lat/Lon” is displayed, then press ENTER. The position (lat/long) ofthe GPS at the moment you push ENTER is set as a user waypoint.From the SAR Map page, pressing the "Mark" smart key saves presentposition and brings up the user waypoint screen; you can change the name andthe Lat/Long using the large and small knobs. Pressing ENTER will save thewaypoint. [The very first time this feature is used, the position is assigned adefault number, "SAR000". Subsequent saves are automatically given sequentialnumbers (e.g., SAR001 and SAR002); they can be recalled, edited and deletedbut not overwritten.]8.8.4 Recall a User WaypointUser waypoints can be recalled from the Navigation or Flight Plan modes.They can also be called up to compile a flight plan.GX-55From the DB (Database) screen, turn the large knob until the "AccessDatabase" screen is displayed and press ENTER. Turn the small knob untilUSER is displayed, and then use the large and small knobs to enter characters ofthe user waypoint.152