2 Visual Components Manuals

Data Point
Value 1
Value 2
No action occurs during the touch button's released state.
Toggle UINT The UINT connected process variable is set to the value in the
Value 2 field, but only if the process variable currently contains
the value in the Value 1 field.
Momentary
USINT
The process variable is set to the value in the Value 1 field in
every other case.
If the value is not otherwise changed, then each activation of the
touch field toggles the value.
No action occurs during the touch button's released state.
The USINT connected process variable is set to the value in the
Value 1 field when the touch field is touched.
When the touch−operated field is released, the process variable
is set to the value 0 (predefined).
The Value 2 input field is not available for this key type.
The process variable which should be manipulated with this touch field is located
in the Source field.
The Assign... button opens a dialog box to select a variable with a suitable data
type.
Possible Settings for:
Set USINT
Toggle USINT
Momentary USINT
Set UINT
Toggle UINT
Name of a USINT process
variable
Name of a UINT process
variable
The value is written to the Data Point process variable using the requirements
described under Key Type (see above).
Possible Settings for:
Set USINT
Toggle USINT
Momentary USINT
Set UINT
Toggle UINT
0 − 255
0 − 65535
The value is written to the Data Point process variable using the requirements
described under Key Type (see above).
Possible Settings for:
Toggle USINT 0 − 255
Toggle UINT 0 − 65535
Set USINT
Set UINT
Momentary USINT
No settings possible or
required.
Introduction to Visual Components 2.3
Completion Data Point After each operation of the touch field, a process variable of data type UINT can
additionally be set to a predefined value. This makes requesting and evaluating
input and operations easier to accomplish in the control application.
The process variable which should be manipulated after this touch field is
activated is located in the Source field.
The Assign... button opens a dialog box to select a variable with a suitable data
type.
120 3.2.4.1 Button Touch−Operated Field − Reference