2 Visual Components Manuals

Introduction to Visual Components 2.3
Positioning the cursor is configurable using the four main directions.
It should be noted that the input fields should be arranged geometrically. If an input field within the size (width /
height) of the original field is not found in the direction specified, then searching continues over the screen
edges in the same direction.
4.10.5 Configuring Several Key Levels
Only a few keys are available on smaller panels. The possibility exists to enter up to four different characters per
key so that alphanumeric input can also be input alongside numeric input. A function key can also be assigned
up to three additional characters. Control keys apply to all key levels and cannot be set with additional
characters.
To implement multiple key levels, some additional settings have to be made.
4.10.5.1 Setting the 'Switch Levels' Key
In order to set characters in additional key levels, one (or more) switch level key(s) must be defined.
Configuration for this takes place in the global key configuration in the picture overview.
The 'Properties' dialog box is opened by double−clicking the key which should be configured as the switch key.
4.10.5 Configuring Several Key Levels 389