Compact body All-rounder

Application to geared motorGM-S, GM-D, GM-SY, GM-HY2 series• Wide constant torque range even with the standard type(when usingadvanced magnetic flux vector control)Load torque is not need to be reduced even at a low speed andconstant torque (100% torque) continuous operation is possiblewithin the range of speed ratio 1/20 (3 to 60Hz). (0.1K to 0.75K)• Wide speed control rangeThe motor can be used in the wide speed deviation range of 3 to120HzThe characteristic of motor running at 60Hz or more is that outputtorque is constant. (0.1K to 0.75K)Note that operation characteristic in the chart below can not beobtained if V/F control is employed.•Torque characteristic (range during advanced magnetic flux vector control)Output torque (%) (60 Hz is standard)250.0200.0150.0100.050.00.0036(when 0.1kW to 0.75kW)Maximum torquefor short time70.050.0Continuous operationtorque20 40 60 80 100 120Output frequency (Hz)Output torque (%) (60 Hz is standard)InverterTypeGM-SGM-SYGM-HY2250.0200.0170.0150.0100.0GM-D50.030.0Standard specificationsOutput(kW)0.1 to2.20.4 to2.23.75.57.5Numberof Poles4AvailableFrequency Range(base frequency60Hz)GreaseLubrication3 to120Hz3 to120Hz(when 1.5kW to 7.5kW)1.5kW to 3.7kW5.5kW, 7.5kW1.5kW to 3.7kW5.5kW, 7.5kWOilLubrication25 to120Hz25 to115HzMaximum torquefor short timeConstant TorqueRange When UsingAdvanced MagneticFlux Vector Control70.050.0Continuous operationtorque0.00361020 40 60 80 100 120Output frequency (Hz)3 to 60Hz(0.1kW to 0.75kW)6 to 60Hz(1.5kW, 2.2kW)3 to 60Hz(0.4kW, 0.75kW)6 to 60Hz(1.5kW, 7.5kW)FeaturesInquiryWarrantyCompatibilityPeripheralDevicesMotorStandardSpecificationsInstructionsOptionsOutlineDimensionDrawingsTerminal ConnectionDiagramTerminal SpecificationExplanationOperation panelParameter unitFR ConfiguratorParameterListExplanationsofParametersProtectiveFunctions66