Compact body All-rounder

FunctionParameter Name Setting RangeMinimumSettingIncrementsInitialValueRefertoPageCustomerSettingPUCalibration parametersClear parametersInitial value change listC0FM terminal calibration — — — 47(900)C2(902)C3(902)125(903)C4(903)C5(904)C6(904)126(905)C7(905)C22 ∗5(922)C23 ∗5(922)C24 ∗5(923)C25 ∗5(923)Terminal 2 frequency setting biasfrequency0 to 400Hz 0.01Hz 0Hz 39Terminal 2 frequency setting bias 0 to 300% 0.1% 0% 39Terminal 2 frequency setting gainfrequency0 to 400Hz 0.01Hz 60Hz 39Terminal 2 frequency setting gain 0 to 300% 0.1% 100% 39Terminal 4 frequency setting biasfrequency0 to 400Hz 0.01Hz 0Hz 39Terminal 4 frequency setting bias 0 to 300% 0.1% 20% 39Terminal 4 frequency setting gainfrequency0 to 400Hz 0.01Hz 60Hz 39Terminal 4 frequency setting gain 0 to 300% 0.1% 100% 39Frequency setting voltage biasfrequency (built-in potentiometer)0 to 400Hz 0.01Hz 0 39Frequency setting voltage bias (built-inpotentiometer)0 to 300% 0.1% 0 39Frequency setting voltage gainfrequency (built-in potentiometer)0 to 400Hz 0.01Hz 60Hz 39Frequency setting voltage gain (built-inpotentiometer)0 to 300% 0.1% 100% 39990 PU buzzer control 0, 1 1 1 48991 PU contrast adjustment 0 to 63 1 58 48Pr.CL Parameter clear 0, 1 1 0 48ALLC All parameter clear 0, 1 1 0 48Er.CL Alarm history clear 0, 1 1 0 48Pr.CH Initial value change list — — — 48∗1 Differ according to capacities. (0.1K to 0.75K/1.5K to 3.7K/5.5K, 7.5K/11K, 15K)∗2 Differ according to capacities. (3.7K or less/5.5K or more)∗3 Differ according to capacities. (0.1K, 0.2K/0.4K to 7.5K/11K, 15K)∗4 The range differs according to the Pr. 71 setting.∗5 Set this parameter when calibrating the operation panel built-in potentiometer of the FR-E500 series operation panel (PA02) connected with cable.25