Yotta RAID Software installation guide - Axus

Software Operation ManualOverwrite ParityNo or Yes (Default:No)If parity inconsistency is detected during the disk scrubbing, the controller will overwrite the parityScrub ModeManual ScrubbingUsers can select one or all arrays for start disk scrubbing or stop it any timeSchedule ScrubbingUsers can set up the disk scrubbing schedule for one or all arrays to execute disk scrubbingfunction. The schedule could be specified to be :• Frequency in weeks (Once per 0 week/ Once per 1 week/Once per 52 weeks )• Date (Monday-Sunday)• Time (0:00~23:00)1. If the frequency is set to zero, controller will start diskscrubbing ONCE only at the specified time.2. When the array is not in the optimal state, the controller willgive up disk scrubbing and record this event in the event log.Or,3. If the controller is not in power-on state at the schedule time,when restart, the controller will record this event to notifyusers that the disk scrubbing is not executed.View ScheduleUser could select this function to check the disk scrubbing scheduleSnapshotNot Ready, reserved for future.- 53 -