Yotta RAID Software installation guide - Axus

Software Operation ManualDisk ScrubbingDisk scrubbing is used to check parity, fix corrupted parity, and remap any bad sectors on thehard drives.Overwrite parity when checked by check mark, system will overwrite any corrupted parity withproper parity.For All Array when checked by check mark, all array within the chassis will be ran withscrubbing. You may also manually select array to be run with scrubbing. When using manualmode, make sure there is not a check mark by the For All Array check box.Manual Scrubbing when selected, you may force the controller to start or stop scrubbing.Schedule Scrubbing when selected, you may schedule a time for the controller to runscrubbing automatically.Confirm the setting of this array when selected, scrubbing setting will be [confirmed andready to be saved]. You may notice that once all arrays is selected, then [confirm the settingof this array] will disappeared. This is due to [confirm the setting of this array] can be onlyapplied to single array not multiple arrays.Save and Process when clicked, all changes made to this page will be saved and executed.- 72 -