AT Commands Manual - Teltonika

More documents

Recommendations

Info

AT CommandsUser ManualNote: the handling related to “smsfull” is dependent from the presence of the compiler switch DR_TE_SM_EXTERNAL. The range 0-1 of thisparameter exists, if the compiler switch DR_TE_SM_EXTERNAL does not exist; otherwise the values 0, 2, 3, 4, 5 are provided for and they havethe meaning:- 0: memory allocations are available.- 2: the last free SMS entry on the SIM card is used.- 3: a new MT SMS call-2 can not be stored on the SIM because the storage is full.- 4: a new SMS not-class-2 can not be stored because the external storage is full, whereby the storage on the SIM card is still free.- 5: a new SMS can not be stored because the external storage and the SMS storage on the SIM card are full.5.8 Mobile termination event reporting +CMERCommand syntaxDescriptionAT+CMER=,,,, This set command enables or disables sending of unsolicited resultcodes from TA to TE in the case of key pressings, display changesand indicator state changes. controls the processing ofAT+CMER=1,1,0,2,1unsolicited result codes specified within this command.OKorCME ERROR: Read command+CMER:AT+CMER?,,,,e.g. +CMER: 1,1,0,2,1Test commandAT+CMER=?OK+CMER: (list of supported ’s),(list of supported’s), (list of supported ’s), (list of supported’s),(list of supported ’s)OK may be:− 0: buffer unsolicited result codes in the TA− 1: discard unsolicited result codes when the V.24 interface is reserved for data; otherwise display themon TE directly− 2: buffer unsolicited result codes in TA when the V.24 interface is reserved and flush them afterreservation; otherwise display them on TE directly− 3: forward unsolicited result codes directly to the DTE can have the values:− 0: no keypad event reporting− 1: keypad event reporting via +CKEV: , (s. +CKPD) for those keys which are notcaused via +CKPD when the V.24 interface is not reserved− 2: keypad event reporting via +CKEV: , for all keys when the V.24 interface is notreserved can have the values− 0: no display event reporting− 1: display event reporting via +CDEV: , when the V.24 interface is not reserved, forthose elements which are not caused via +CDIS; indicates the element order number (asspecified for +CDIS) and is the new value of text element; character set used in is asspecified by setting +CSCS;− 2: display event reporting via +CDEV: , for all elements when the V.24 interface is notreserved. can have the values:− 0: no indicator event reporting14
AT CommandsUser Manual− 1: indicator event reporting using result code +CIEV: ,. indicates the indicatororder number (as specified for +CIND) and is the new value indicator. Only the indicator eventswhich are not caused by +CIND shall be indicated by the TA to the TE.− 2: indicator event reporting using result code +CIEV: ,. All indicator events shall bedirected from TA to TE. may have the following values:− 0: TA buffer of unsolicited result codes defined within this command is cleared when 1...3 isentered− 1: TA buffer of unsolicited result codes defined within this command is flushed to the TE when 1...3 is entered (OK response shall be given before flushing the codes).5.9 Clock +CCLKCommand syntaxAT+CCLK=AT+CCLK=”02/07/01,14:54:00”Read commandAT+CCLK?Test commandAT+CCLK=?DescriptionThis set command sets the real-time clock of the ME.OKorCME ERROR: +CCLK: “02/07/01,14:55:00”OKOK: string type value; format is “yy/MM/dd,hh:mm:ss+TZ”, wherein characters indicates year, month,day, hour, minutes, seconds. TZ: Time zone information represented by two digits. The time zone informationis optional; if it was entered it is always accepted, but the display of TZ for query contains this information (inupdated form) only if the network supports the time zone information.5.10 Alarm +CALACommand syntaxAT+CALA=,,,,,AT+CALA=”02/07/01,14:56:00+04”,1,1,”Alarm”Read commandAT+CALA?Test commandAT+CALA=?DescriptionThis set command sets an alarm time in the MT. At expiration apredefined text is displayed. There can be an array of different types ofalarms, and each alarm may cause different text to be displayed in theMT display. If setting fails, a CME ERROR: is returned. Toset up a recurrent alarm for more days in the week, the parameter is used. When an alarm is timed out and executed, first thealarm actions are executed as display of provided text and e.g soundalarm, and second, the unsolicited alarm code +CALV: isdisplayed on DTE, even if the alarm was silent.OKorCME ERROR: +CALA: , , , , ,+CALA: , , , , ,[...] i.e. +CALA: ”02/07/01,14:56:00+04”,1,1,”Alarm”,0OK+CALA: (list of supported s),(list of supporteds),,,(list of supported ’s)OK: string type value; format is “yy/MM/dd,hh:mm:ss+tz”, wherein characters indicates year, month, day,hour, minutes, seconds and time zone.Note: if the parameter is used, the parameter must not contain a date. , , : integer type value indicating the index ofthe alarm; the maximum number of alarms is 3; if not indicated by user, default value 1 is assumed15
Page 7 and 8: AT CommandsUser Manual1 Introductio
Page 9 and 10: AT CommandsUser Manual4 General com
Page 11 and 12: AT CommandsUser Manual5 Mobile equi
Page 13: AT CommandsUser Manual5.6 Display c
Page 17 and 18: AT CommandsUser Manual may be− 17
Page 19 and 20: AT CommandsUser Manual5.17 Call met
Page 21 and 22: AT CommandsUser Manual6 Call Contro
Page 23 and 24: AT CommandsUser ManualCommand synta
Page 25 and 26: AT CommandsUser Manual7 Network Ser
Page 27 and 28: AT CommandsUser Manual7.4 Network r
Page 29 and 30: AT CommandsUser Manual8 Security Co
Page 31 and 32: AT CommandsUser Manual9 Phonebook C
Page 33 and 34: AT CommandsUser Manual10 Short Mess
Page 35 and 36: AT CommandsUser Manual may be:− 0
Page 37 and 38: AT CommandsUser Manual10.9 Read mes
Page 39 and 40: AT CommandsUser Manual10.13 Write m
Page 41 and 42: AT CommandsUser Manual11 Supplement
Page 43 and 44: AT CommandsUser Manual string type
Page 45 and 46: AT CommandsUser Manual11.6 Advise o
Page 47 and 48: AT CommandsUser ManualAT+CTFR=? is
Page 49: AT CommandsUser ManualTest commandA
Page 52: AT CommandsUser Manualservice will
Page 57 and 58: AT CommandsUser Manual13.17 Call te
Page 59 and 60: AT CommandsUser Manual may be in ra
Page 61 and 62: AT CommandsUser Manual14 V24 contro
Page 63 and 64: AT CommandsUser ManualCME ERROR: 14
Page 65 and 66:
AT CommandsUser Manual may be:− 0
Page 67 and 68:
AT CommandsUser Manual is in range
Page 69 and 70:
AT CommandsUser Manual15 Specific A
Page 71 and 72:
AT CommandsUser Manual: Channel mod
Page 73 and 74:
AT CommandsUser Manual- 2: dialing
Page 75 and 76:
AT CommandsUser Manual15.11 Configu
Page 77 and 78:
AT CommandsUser ManualSIM ToolkitTh
Page 79 and 80:
AT CommandsUser Manual may be (deci
Page 83 and 84:
AT CommandsUser Manual- 0 detached.
Page 85 and 86:
AT CommandsUser ManualAT+CGATT?Test
Page 87 and 88:
AT CommandsUser Manual16.11 GPRS mo
Page 89 and 90:
AT CommandsUser Manual17 Appendices
Page 91 and 92:
AT CommandsUser Manual16 normal cal
show all

AT Commands Manual - Teltonika

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?