AT Commands Manual - Teltonika

More documents

Recommendations

Info

AT CommandsUser Manual11.9 Price per unit and currency table +CPUCCommand syntaxDescriptionAT+CPUC=, This set command sets the parameters of Advise of Charge related price per unit and,currency table in SIM file EFPUCT. PUCT information can be used to convert the homeunits into currency units. SIM PIN2 is required to set the parameters.AT+CPUC=”USD”,”0.20”,”0933”Read commandAT+CPUC?Test commandAT+CPUC=?OKorCME ERROR: +CPUC: ,OKOK string type containing the three-character currency code (e.g. “GBP”,”EUR”). string type containing the price per unit; dot is used as a decimal separator. string type containing the SIM PIN2.11.10 Call related supplementary services +CHLDCommand syntaxDescriptionAT+CHLD= This command allows to manage call hold and multiparty conversation (conference call).Calls can be put on hold, recovered, released or added to conversation.AT+CHLD=2 OKorCME ERROR: Test command+CHLD: (0,1,1x,2,2x,3,4,4*,6,7) i.e. (list of supported s)AT+CHLD=?OK may be:− 0: release all held calls or set User Determined User Busy for a waiting call; if both exists then only thewaiting call will be rejected.− 1: release all active calls and accepts the other (held or waiting).− 1x: release a specific call (x specific call number as indicated by +CCLC).− 2: place all active calls (if exist) on hold and accepts the other call (held or waiting).− 2x: place all active calls on hold except call x with which communication is supported.− 3: adds a held call to the conversation.− 4: connects the two calls and disconnects the subscriber from both calls (Explicit Call Transfer).− 4*: call deflection (proprietary feature ).− 5: call completion of busy subscriber; this command syntax will be interpreted as an activation request,if the network has previously offered the possibility to activate this function, which will be indicated to theuser by the unsolicited result code +XCCBS: 1 (CCBS is possible).− 6: puts an active call on hold or an held call to active, while another call is waiting.− 7: disconnect users in multiparty without accepting incoming call.11.11 Call deflection +CTFRCommand syntaxDescriptionAT+CTFR= This command allows the DTE user to respond to an incoming call offered by the network,, by requesting call deflection, i.e. redirection of this call to another number specified in the,response. The call deflection is a supplementary service applicable only to voice calls(teleservice 11).AT+CTFR=”09113788” OKorCME ERROR: Test commandOK46
AT CommandsUser ManualAT+CTFR=? is the string type phone number of format specified by . is the string type subaddress of format specified by .11.12 List current calls +CLCCCommand syntaxAT+CLCCDescriptionThis command returns the list of current calls of ME. If command succeeds but no calls areavailable, no information response is sent to TE.AT+CLCC +CLCC: 1,0,0,0,0,”0913137880”,129OKorOK (if no calls)orCME ERROR: Test commandAT+CLCC=?OK integer type indicating the call identification (s.+CHLD x). direction and may be:− 0: mobile originated (MO).− 1: mobile terminated (MT). state of the call and may be− 0: actine.− 1: held.− 2: dialling (MO call).− 3: alerting (MO cal).− 4: incoming (MT call).− 5: waiting (MT call). teleservice and may be:− 0: voice.− 1: data.− 2: FAX.− 9: unknown. may be− 0: cal is not one of multiparty (conference) call parties.− 1: call is one of multiparty cal parties. string type indicating the phone number in format specified by . type of address octet (phone number) in integer format. optional string alphanumeric representation of corresponding to the entry found inphonebook.11.13 Supplementary service notifications +CSSNCommand syntaxDescriptionThis command refers to supplementary service related network initiated notifications. When=1 and a supplementary service notification is received after a mobile originated callsetup, intermediate result code +CSSI: is sent before any other MO call setupresult codes. When =1 and a supplementary service notification is received during acall, unsolicited result code +CSSU: is sent.AT+CSSN=,AT+CSSN=1,1Read commandAT+CSSN?+CSSI: [,]+CSSU: [[,,[,,]]]OKorCME ERROR: +CSSN: ,OK47
Page 7 and 8: AT CommandsUser Manual1 Introductio
Page 9 and 10: AT CommandsUser Manual4 General com
Page 11 and 12: AT CommandsUser Manual5 Mobile equi
Page 13 and 14: AT CommandsUser Manual5.6 Display c
Page 15 and 16: AT CommandsUser Manual− 1: indica
Page 17 and 18: AT CommandsUser Manual may be− 17
Page 19 and 20: AT CommandsUser Manual5.17 Call met
Page 21 and 22: AT CommandsUser Manual6 Call Contro
Page 23 and 24: AT CommandsUser ManualCommand synta
Page 25 and 26: AT CommandsUser Manual7 Network Ser
Page 27 and 28: AT CommandsUser Manual7.4 Network r
Page 29 and 30: AT CommandsUser Manual8 Security Co
Page 31 and 32: AT CommandsUser Manual9 Phonebook C
Page 33 and 34: AT CommandsUser Manual10 Short Mess
Page 35 and 36: AT CommandsUser Manual may be:− 0
Page 37 and 38: AT CommandsUser Manual10.9 Read mes
Page 39 and 40: AT CommandsUser Manual10.13 Write m
Page 41 and 42: AT CommandsUser Manual11 Supplement
Page 43 and 44: AT CommandsUser Manual string type
Page 45: AT CommandsUser Manual11.6 Advise o
Page 49: AT CommandsUser ManualTest commandA
Page 52: AT CommandsUser Manualservice will
Page 57 and 58: AT CommandsUser Manual13.17 Call te
Page 59 and 60: AT CommandsUser Manual may be in ra
Page 61 and 62: AT CommandsUser Manual14 V24 contro
Page 63 and 64: AT CommandsUser ManualCME ERROR: 14
Page 65 and 66: AT CommandsUser Manual may be:− 0
Page 67 and 68: AT CommandsUser Manual is in range
Page 69 and 70: AT CommandsUser Manual15 Specific A
Page 71 and 72: AT CommandsUser Manual: Channel mod
Page 73 and 74: AT CommandsUser Manual- 2: dialing
Page 75 and 76: AT CommandsUser Manual15.11 Configu
Page 77 and 78: AT CommandsUser ManualSIM ToolkitTh
Page 79 and 80: AT CommandsUser Manual may be (deci
Page 83 and 84: AT CommandsUser Manual- 0 detached.
Page 85 and 86: AT CommandsUser ManualAT+CGATT?Test
Page 87 and 88: AT CommandsUser Manual16.11 GPRS mo
Page 89 and 90: AT CommandsUser Manual17 Appendices
Page 91 and 92: AT CommandsUser Manual16 normal cal

AT Commands Manual - Teltonika

Create successful ePaper yourself

Delete template?

Save as template?