AT Commands Manual - Teltonika

AT CommandsUser Manual− "PU" network sUbset Personalisation (refer GSM 02.22 [33]).− "PP" service Provider Personalisation (refer GSM 02.22 [33]).− "PC" Corporate Personalisation (refer GSM 02.22 [33]).− “AO”BAR (Bar All Outgoing Calls).− “OI” BOIC (Bar Outgoing International Calls).− “OX” BOIC-exHC (Bar Outgoing International Calls except to Home Country).− “AI” BAIC (Bar All Incoming Calls).− “IR” BIC-Roam (Bar Incoming Calls when Roaming outside the home country).− “AB” All Barring services (applicable only for =0).− “AG” All outGoing barring services (applicable only for =0).− “AC” All inComing barring services (applicable only for =0). may be:− 0 unlock.− 1 lock.− 2 query status. may be:− 0 not actine.− 1 active. string type; shall be the same as password specified for the facility from the ME user interface orwithcommand +CPWD. is a sum of integers each representing a class of information (default 7) and may be:1 voice.2 data.4 FAX.8 short message service.16 data circuit sync.32 data circuit async.64 dedicated packet Access.128 dedicated PAD Access.8.3 Change password +CPWDCommand syntaxDescriptionAT+CPWD=,, This action command sets a new password for the facility lock function defined bycommand +CLCK. The command is abortable by hit a key.AT+CPWD=”SC”,”0933”,”0934”Test commandAT+CPWD=?OKorCME ERROR: +CPWD:(“SC”,8”),(“P2”,8),(„PS”,4),(“PN”,16),(“PU”,16),(“PP”,16),(“PC”,16),(“AO”,4),(“OI”,4),(“OX”,4),(“AI”,4),(“IR”,4),(“AB”,4),(“AG”,4),(“AC”,4)Note: list of supported (,)sOK “P2” and other values as defined for +CLCK except “PN”, “PU”, “PP, “PC”. string type containing the old password. string type containing the new password. length of password (digits).30