AT Commands Manual - Teltonika
AT Commands Manual - Teltonika
AT Commands Manual - Teltonika
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>AT</strong> <strong>Commands</strong>User <strong>Manual</strong>10.13 Write message to memory +CMGWCommand syntaxDescriptionCommand syntax in text mode:<strong>AT</strong>+CMGW=,,Command syntax in PDU mode:<strong>AT</strong>+CMGW=,This execution command stores message (SMS-DELIVER or SMS-SUBMIT) tomemory storage . Memory location of the stored message isreturned. separates the parameter part from the text part of the edited SMSin text mode. indicates that the SMS shall be sent, while indicatesaborting of the edited SMS.In text mode:<strong>AT</strong>+CMGW=”091137880”“This is the text”if PDU mode:<strong>AT</strong>+CMGW=52,Test command<strong>AT</strong>+CMGW=?+CMGW: OKorCMS ERROR: OKNote: the optional response field is not returned when +CSMS=1 (t.b.d.)10.14 Send message from storage +CMSSCommand syntaxDescription<strong>AT</strong>+CMSS=,, This execution command sends the message with location value fromthe preferred message storage to the network (SMS-SUBMIT or SMS-COMMAND). If a new recipient address is given for SMS SUBMIT, itshall be used instead of the one stored with the message. Reference value is returned to the TE on successful message delivery.<strong>AT</strong>+CMSS=2Test command<strong>AT</strong>+CMSS=?If text mode:+CMSS: [,]OKorCME ERROR:
Change language