AT Commands Manual - Teltonika

AT CommandsUser Manual11 Supplementary Services Command11.1 Call forwarding +CCFCCommand syntaxAT+CCFC=,,,,,,,DescriptionThis command allows the control of the call forwarding supplementary serviceaccording to GSM02.82. Registration, erasure, activation, deactivation and statusquery are supported. In case of enabled ALS = 1 will be treated as voiceline 1 and = 256 will be treated as voice line 2. (CPHS feature). Thiscommand is abortable (proprietary feature).AT+CCFC=0,3,”01711234”Test commandAT+CCFC=?OKorwhen =2+CCFC:,,,,,,+CCFC:,,,,,,[...]]CME ERROR: +CCFC: (list of supported s)OK may by:− 0 unconditional.− 1 mobile busy.− 2 no reply.− 3 not reachable.− 4 all call forwarding.− 5 all conditional call forwarding. may be:− 0 disable.− 1 enable.− 2 query status.− 3 registration.− 4 erasure. string type phone number of forwarding address in format. type of address in integer format; default 145 when dialling string includes “+”, otherwise 129. string type subaddress; parameter currently ignored after syntax check. type of subaddress; default 128 (TON/NPI unknown); parameter currently ignored after syntaxcheck is a sum of integers each representing a class of information (default 7 or interpreted by network if notexplicitly entered) and may be:− 1 voice (voice line 1 if ALS enabled).− 2 data.− 4 FAX.− 8 SMS.− 16 data circuit sync.− 32 data circuit async.− 64 dedicated packet access.− 128 dedicated PAD access.− 256 voice line 2 (if ALS enabled).41