AT Commands Manual - Teltonika

More documents

Recommendations

Info

AT CommandsUser Manual in range 0-FFH13.38 SubAddress parameter +FSACommand syntaxDescriptionAT+FSA=This command sets the Subaddress. The DCE sends the numeric string contained in +FSAat the times specified in T.30, if the corresponding parameter is not zero string. 20 digit string; allowed values: 0-9, *, #, space. 0.13.39 Request to poll +FSPCommand syntaxDescriptionAT+FSP=[]This command indicates whether or not the DTE wants to poll. The command has noeffect.60
AT CommandsUser Manual14 V24 control and V25ter commands14.1 Reset to default configuration ZCommand syntaxDescriptionThis command resets the parameters of all AT-commands (also FAX-related). The valuesrelated to parameters contained in a user profile will be taken from the correspondingNVRAM-profile, indicated by the .ATZOKorCME ERROR: indicates NVRAM profile; possible values 0-9.14.2 Set to factory defined configuration &FCommand syntaxDescriptionThis command resets only the parameters of the not FAX-related AT-command to factorydefined defaults.AT&FOKorCME ERROR: only 0 allowed.14.3 Circuit 109 behavior &CCommand syntaxDescriptionThis command determines how the state of circuit 109 relates to the detection of receivedline signal from the remote end.AT&COKorCME ERROR: indicates the behaviors of circuit 109 as follows:− 0: the DCE always presents the ON condition on circuit 109.− 1: circuit 109 changes in accordance with the underlying DCE, which may include functions other thanthe physical layer functions.14.4 Circuit 108/2 behavior &DCommand syntaxDescriptionAT&DThis command determines how the DCE responds when circuit 108/2 is changed from ONto OFF condition during on-line data state.AT&D1OKorCME ERROR: may be:− 0: the DCE ignores circuit 108/2.− 1: upon an ON-to-OFF transition of circuit 108/2, the DCE enters online command state and issues anOK result code.− 2: upon an ON-to-OFF transition of circuit 108/2, the DCE instructs the underlying DCE to performan orderly cleardown of the call. Automatic answer is disabled while circuit 108/2 remains OFF.61
Page 7 and 8:
AT CommandsUser Manual1 Introductio
Page 9 and 10: AT CommandsUser Manual4 General com
Page 11 and 12: AT CommandsUser Manual5 Mobile equi
Page 13 and 14: AT CommandsUser Manual5.6 Display c
Page 15 and 16: AT CommandsUser Manual− 1: indica
Page 17 and 18: AT CommandsUser Manual may be− 17
Page 19 and 20: AT CommandsUser Manual5.17 Call met
Page 21 and 22: AT CommandsUser Manual6 Call Contro
Page 23 and 24: AT CommandsUser ManualCommand synta
Page 25 and 26: AT CommandsUser Manual7 Network Ser
Page 27 and 28: AT CommandsUser Manual7.4 Network r
Page 29 and 30: AT CommandsUser Manual8 Security Co
Page 31 and 32: AT CommandsUser Manual9 Phonebook C
Page 33 and 34: AT CommandsUser Manual10 Short Mess
Page 35 and 36: AT CommandsUser Manual may be:− 0
Page 37 and 38: AT CommandsUser Manual10.9 Read mes
Page 39 and 40: AT CommandsUser Manual10.13 Write m
Page 41 and 42: AT CommandsUser Manual11 Supplement
Page 43 and 44: AT CommandsUser Manual string type
Page 45 and 46: AT CommandsUser Manual11.6 Advise o
Page 47 and 48: AT CommandsUser ManualAT+CTFR=? is
Page 49: AT CommandsUser ManualTest commandA
Page 52: AT CommandsUser Manualservice will
Page 57 and 58: AT CommandsUser Manual13.17 Call te
Page 59: AT CommandsUser Manual may be in ra
Page 63 and 64: AT CommandsUser ManualCME ERROR: 14
Page 65 and 66: AT CommandsUser Manual may be:− 0
Page 67 and 68: AT CommandsUser Manual is in range
Page 69 and 70: AT CommandsUser Manual15 Specific A
Page 71 and 72: AT CommandsUser Manual: Channel mod
Page 73 and 74: AT CommandsUser Manual- 2: dialing
Page 75 and 76: AT CommandsUser Manual15.11 Configu
Page 77 and 78: AT CommandsUser ManualSIM ToolkitTh
Page 79 and 80: AT CommandsUser Manual may be (deci
Page 83 and 84: AT CommandsUser Manual- 0 detached.
Page 85 and 86: AT CommandsUser ManualAT+CGATT?Test
Page 87 and 88: AT CommandsUser Manual16.11 GPRS mo
Page 89 and 90: AT CommandsUser Manual17 Appendices
Page 91 and 92: AT CommandsUser Manual16 normal cal
show all

AT Commands Manual - Teltonika

Create successful ePaper yourself

Delete template?

Save as template?