AT Commands Manual - Teltonika
AT Commands Manual - Teltonika
AT Commands Manual - Teltonika
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>AT</strong> <strong>Commands</strong>User <strong>Manual</strong>10.16 Delete SMS +CMGDCommand syntaxDescription<strong>AT</strong>+CMGD=, This execution command deletes message from preferred message storage location . If is present and not set to 0 then the ME shall ignore and follow the rules for shown below. will be supportedwith EFS21.03.00<strong>AT</strong>+CMGD=3OKorCMS ERROR: Test command+CMGD: (list of supported s)[,(list of supported s)<strong>AT</strong>+CMGD=?OK: an integer indicating multiple message deletion request as follows:- 0 (or omitted) delete the message specified in .- 1 Delete all read messages from preferred message storage, leaving unread messages and stored mobileoriginated messages (whether sent or not) untouched.- 2 delete all read messages from preferred message storage and sent mobile originated messages, leavingunread messages and unsent mobile originated messages untouched.- 3 Delete all read messages from preferred message storage, sent and unsent mobile originated messagesleaving unread messages untouched.- 4 delete all messages from preferred message storage including unread messages.10.17 Service center address +CSCACommand syntaxDescription<strong>AT</strong>+CSCA=, This set command updates the SMSC address, through which mobile originated SMS’sare transmitted. In text mode the setting is used by send and writes commands. InPDU mode the setting is used by the same commands, But only when the length ofSMSC address coded into parameter equals zero.<strong>AT</strong>+CSCA=”0170111000”,129Read command<strong>AT</strong>+CSCA?Test command<strong>AT</strong>+CSCA=?OKorCME ERROR: +CSCA: ,OKOK10.18 Select cell broadcast message types +CSCBCommand syntaxDescription<strong>AT</strong>+CSCB=, This set command selects which types of CBM’s are to be received by the ME,<strong>AT</strong>+CSCB=0,”1,5,10-11,40”,””Read command<strong>AT</strong>+CSCB?Test command<strong>AT</strong>+CSCB=?OKorCME ERROR: +CSCB=,,OK+CSCB: (list of supported s)OKNote: if =0 and is an empty string, receiving of CB SMS is stopped. may be:− 0 message types specified in and are accepted− 1 message types specified in and are not accepted string type containing all possible combinations of CBM message identifiers () string type containing all possible combinations of CBM data coding schemes ()40
Change language