AT Commands Manual - Teltonika

More documents

Recommendations

Info

AT CommandsUser Manual16.4 Quality of service profile (requested) +CGQREQCommand syntaxDescriptionAT+CGQREQ=,,,reliability>,,AT+CGDCONT is needed previouslyAT+CGQREQ=1,1,1,1,1,1Read commandAT+CGQREQ?Test commandAT+CGQREQ=?AT+CGQMIN=,,,,,This command allows the TE to specify a quality of service profile that isused when the MT sends an activate PDP context request message to thenetwork. The set command specifies a profile for the context identified by the (local context identification parameter). The syntax form used onlywith parameter , causes the requested profile for the indicated contextnumber to become undefined.OKorCME ERROR: +CGQREQ: 1,1,1,1,1,1 i.e. +CGQREQ:,,,,,+CGQREQ:,,,,,...OK+CGQREQ: “IP”, (0-3), (0-4), (0-5), (0-9), (0-18,31)i.e. +CGQREQ: , (list of supported s), (list ofsupported s), (list of supported s),(list of supported s), (list of supported s)+CGQREQ: ,(list of supporteds),(list of supported s), (list of supporteds), (list of supported s),(list of supported s)...OK16.5 Quality of service profile (minimum acceptable) +CGQMINCommand syntaxDescriptionThis command allows the TE to specify a QoS (Quality of Service) minimumacceptable profile which is checked by the MT against the negotiated profilereturned in the activate PDP context accept message. The profile is identifiedby the parameter.AT+CGDCONT is needed previouslyAT+CGQMIN=1,1,1,1,1,1Read commandAT+CGQMIN?Test commandAT+CGQMIN=?OKorCME ERROR: +CGQMIN: ,,,,,OK+CGQMIN: “IP”,(0-3),(0-4),(0-5),(0-9),(0-18,31) i.e.+CGQMIN: , (list of supported s),(list of supported s), (list of supported s),(list of supported s), (list of supported s)[+CGQMIN: , (list of supported s),(list of supported s), (list of supported s),(list of supported s), (list of supported s)...OK16.6 GPRS attach or detach +CGATTCommand syntaxDescriptionAT+CGATT= This execution command is used to attach the MT to, or detach the MT from the GPRSservice. After this command the MT remains in command state. If the MT is already in therequested state, the command is ignored and OK is returned to TE. If the requested statecan not be reached, an ERROR is returned. The command is abortable by hit a key; in thiscase a detach is performed (aborting is a proprietary feature). Any active PDP context will beautomatically deactivated when the attachment state changes to detached.AT+CGATT=1Read commandOKorCME ERROR: +CGATT: 84
AT CommandsUser ManualAT+CGATT?Test commandAT+CGATT=?OK+CGATT: (0-1) e.g.+CGATT: (list of supported s)OK16.7 PDP context activate or deactivate +CGACTCommand syntaxDescriptionAT+CGACT=, This execution command is used to activate or deactivate the specified PDP context(s). After,
Page 7 and 8:
AT CommandsUser Manual1 Introductio
Page 9 and 10:
AT CommandsUser Manual4 General com
Page 11 and 12:
AT CommandsUser Manual5 Mobile equi
Page 13 and 14:
AT CommandsUser Manual5.6 Display c
Page 15 and 16:
AT CommandsUser Manual− 1: indica
Page 17 and 18:
AT CommandsUser Manual may be− 17
Page 19 and 20:
AT CommandsUser Manual5.17 Call met
Page 21 and 22:
AT CommandsUser Manual6 Call Contro
Page 23 and 24:
AT CommandsUser ManualCommand synta
Page 25 and 26:
AT CommandsUser Manual7 Network Ser
Page 27 and 28:
AT CommandsUser Manual7.4 Network r
Page 29 and 30:
AT CommandsUser Manual8 Security Co
Page 31 and 32:
AT CommandsUser Manual9 Phonebook C
Page 33 and 34: AT CommandsUser Manual10 Short Mess
Page 35 and 36: AT CommandsUser Manual may be:− 0
Page 37 and 38: AT CommandsUser Manual10.9 Read mes
Page 39 and 40: AT CommandsUser Manual10.13 Write m
Page 41 and 42: AT CommandsUser Manual11 Supplement
Page 43 and 44: AT CommandsUser Manual string type
Page 45 and 46: AT CommandsUser Manual11.6 Advise o
Page 47 and 48: AT CommandsUser ManualAT+CTFR=? is
Page 49: AT CommandsUser ManualTest commandA
Page 52: AT CommandsUser Manualservice will
Page 57 and 58: AT CommandsUser Manual13.17 Call te
Page 59 and 60: AT CommandsUser Manual may be in ra
Page 61 and 62: AT CommandsUser Manual14 V24 contro
Page 63 and 64: AT CommandsUser ManualCME ERROR: 14
Page 65 and 66: AT CommandsUser Manual may be:− 0
Page 67 and 68: AT CommandsUser Manual is in range
Page 69 and 70: AT CommandsUser Manual15 Specific A
Page 71 and 72: AT CommandsUser Manual: Channel mod
Page 73 and 74: AT CommandsUser Manual- 2: dialing
Page 75 and 76: AT CommandsUser Manual15.11 Configu
Page 77 and 78: AT CommandsUser ManualSIM ToolkitTh
Page 79 and 80: AT CommandsUser Manual may be (deci
Page 83: AT CommandsUser Manual- 0 detached.
Page 87 and 88: AT CommandsUser Manual16.11 GPRS mo
Page 89 and 90: AT CommandsUser Manual17 Appendices
Page 91 and 92: AT CommandsUser Manual16 normal cal
show all

AT Commands Manual - Teltonika

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?