AT Commands Manual - Teltonika
AT Commands Manual - Teltonika
AT Commands Manual - Teltonika
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>AT</strong> <strong>Commands</strong>User <strong>Manual</strong> string type phone number of calling address in format specified by . type of address in integer format. optional string type alphanumeric representation of corresponding to the entry found inphonebook. may be:− 0: CLI valid.− 1: CLI has been withheld by the originator.− 2: CLI is not available.: string type subaddress of format specified by .: type of subaddress octet in integer format (refer TS 24.008 [8] subclause 10.5.4.8).: optional digit type parameter indicating that the eMLPP priority level of the incoming call. Thepriority level values are as defined in eMLPP specification 3GPP TS 22.067 [54].11.2 Calling line identification restriction +CLIRCommand syntaxDescription<strong>AT</strong>+CLIR=This command allows to control the calling line identification restriction supplementaryservice (GSM02.81). This command is abortable (proprietary feature).<strong>AT</strong>+CLIR=2OKorCME ERROR: Read command+CLIR: ,<strong>AT</strong>+CLIR?OKTest command+CLIR: (0-2) i.e. (list of supported s)<strong>AT</strong>+CLIR=?OK parameter sets the adjustment for outgoing calls and may be:− 0: presentation indicator is used according to the subscription of the CLIR service.− 1: CLIR invocation.− 2: CLIR suppression. parameter shows the subscriber CLIR status in the network and may be:− 0: CLIR nor provisioned.− 1: CLIR provisioned in permanent mode.− 2: unknown.− 3: CLIR temporary mode presentation restricted.− 4: CLIR temporary mode presentation allowed.11.3 Calling line identification presentation +CLIPCommand syntaxDescription<strong>AT</strong>+CLIP=This command allows to control the calling line identification presentation supplementaryservice. When CLI is enabled, +CLI response is returned after every RING (or +CRING)result code. When the presentation of CLI at the TE is enabled, the following unsolicitedresult code is displayed after RING (or +CRING): +CLIP: ,,[,,[,[[,]]] This command is abortable (proprietary feature).Read command+CLIP: ,<strong>AT</strong>+CLIP?OKTest command+CLIP: (0,1) i.e. (list of supported s)<strong>AT</strong>+CLIP=?OK parameter sets/shows the result code presentation in the TA:− 0: disable.− 1: enable. parameter shows the subscriber CLIP service status in the network and may be:− 0: CLIP not provisioned.− 1: CLIP provisioned.43
Change language