INDUSTRIAL DUTYSERIES HC25Dynapar brandShafted <strong>Encoder</strong>Key Features• Optional Extended Temperature Range of–40° to +85°C• High 5000PPR Resolution Available• Industry Standard Size 25 (2.5”)SPECIFICATIONSSTANDARD OPERATING CHARACTERISTICSCode: IncrementalResolution: 3000 to 5000 PPR (pulses/revolution)Accuracy: (Worst case any edge to any otheredge) ±10.8°/PPRFormat: Two channel quadrature (AB) withoptional Index (Z) and complementary outputsPhase Sense: A leads B for CW or CCW shaftrotation as viewed from the shaft end of theencoder; see Ordering InformationQuadrature Phasing: 90° ± 25° electricalSymmetry: 180° ± 25° electricalIndex: 90° ± 25° electrical (gated with B low)Waveforms: Squarewave with rise and fall timesless than 1 microsecond into a load capacitance of1000 pfELECTRICALInput Power:4.5 min. to 26 VDC max. at 80 mA max., notincluding output loadsOutputs:7273 Open Collector: 30 VDC max., 40 mA sinkmax.7272 Push-Pull and Differential Line Driver: 40mA sink or sourceFrequency Response: 250 kHzElectrical Protection: Overvoltage, reversevoltage and output short circuit protectedNoise Immunity: Tested to EN61326 (Industrial)for Electro Static Discharge, Radio FrequencyInterference, Electrical Fast Transients,Conducted and MagneticInterferenceCONNECTIONSMating Connector:7 pin, style MS3106A-16S-1S (MCN-N5);10 pin, style MS3106A-18-1S (MCN-N6)5 pin, style M12: Cable with connector available8 pin, style M12: Cable with connector availableMECHANICALShaft Loading: 40 lbs. radial, 30 lbs. axialShaft Speed: 10,000 RPM max. (See FrequencyResponse)Starting Torque: (max at 25 °C)HC525: 1.0 oz-in;HC625: 2.5 oz.-inMoment of Inertia: 2.83 x 10 -4 oz–in–sec 2ENVIRONMENTALOperating Temperature:Standard: 0 to +70 °C;Extended: –40 to +85 °CStorage Temperature: –40 to +90 °CShock: 50 G’s for 11 milliseconds durationVibration: 5 to 2000 Hz at 20 G’sHumidity: to 98% without condensationEnclosure Rating:HC525: NEMA12/IP54 (dirt tight, splashproof);HC625: NEMA4/IP66 (dust proof, washdown)2.20
yINDUSTRIAL DUTYSERIES HC25Ordering InformationTo order, complete the model number with code numbers from the table below:Code 1: ModelHC 25HC525 Size 25Enclosed,ShieldedBearingsHC625 Size 25Enclosed,withShaftSealCode 2: PPR30003600409650003,0003,6004,0965,000Code 3: Mechanical0 Flange Mount,3/8" Shaft1 2.50" ServoMount/ 4 Hole,2.00" BC FaceMount, 3/8"Shaft2 Flange Mount,1/4" Shaft3 2.50" ServoMount/4 Hole 2.00" BCFace Mount,1/4" Shaft4 2.50" ServoMount/ 3 Hole,2.00" BC FaceMount, 3/8"Shaft5 2.50" ServoMount/ 3 Hole,2.00" BC FaceMount, 1/4"Shaft6 2.50" ServoMount/ 3 Hole,1.88" BC FaceMount, 3/8"Shaft7 2.50" ServoMount/ 3 Hole,1.88" BC FaceMount, 1/4"Shaft8 2.62" ServoMount/ 3 Hole,1.88" BC FaceMount, 3/8"Shaft9 2.62" ServoMount/3 Hole, 1.88"BC Face Mount,1/4" ShaftCode 4: OutputOrdering Information7 Pin Connector or Cable0 Single Ended, no Index, Format A, Table 21 Single Ended, with Index, Format A, Table 24 Single Ended, with Index, Format B, Table 26 Differential, no Index, Format C, Table 3A Single Ended, with Index, Format C, Table 2C Single Ended, no Index, Format C, Table 2G Single Ended, with Index, Format D, Table 210 Pin Connector or Cable2 Differential, no Index, Format A, Table 13 Differential, with Index, Format A, Table 15 Differential, with Index, Format B, Table 1B Differential, with Index Format C, Table 1D Differential, no Index, Format C, Table 15 Pin M12 ConnectorH Single ended, no index, Format A, Table 4J Single ended, with index, Format A, Table 4K Single ended, with index, Format B, Table 4L Single ended, with index, Format C, Table 4M Single ended, no index, Format C, Table 4N Single ended, with index, Format D, Table 48 Pin M12 ConnectorP Single ended, no index, Format A, Table 5Q Single ended, with index, Format A, Table 5R Single ended, with index, Format B, Table 5S Single ended, with index, Format C, Table 5T Single ended, no index, Format C, Table 5U Single ended, with index, Format D, Table 5V Differential, no index, Format A, Table 6W Differential, with index, Format A, Table 6X Differential, with index, Format B, Table 6Y Differential, with index, Format C, Table 6Z Differential, no index, Format C, Table 6Code 5: Electrical0 5-26V in; 5-26VOpen Collectorwith 2.2kΩ Pullupout1 5-26V in; 5-26VOpen Collector out2 5-26V in; 5VTotem Pole out3 5-26V in; 5V LineDriver out4 5-26V in; 5-26VLine Driver outABCDESame as "0" withextend. temprangeSame as "1" withextend. temprangeSame as "2" withextend. temprangeSame as "3" withextend. temprangeSame as "4" withextend. temprangeCode 6: Termination0 End MountConnector1 Side MountConnectorAvailable whenCode 1is HC525:2 18" Cable, Side3 3' Cable, Side4 6' Cable, Side5 10' Cable, Side6 15' Cable, SideJ 18" Cable, EndK 3' Cable, EndL 6' Cable, EndM 10' Cable, EndN 15' Cable, EndAvailable whenCode 1is HC625:A 18" Watertight, SideB 3' Watertight, SideC 6' Watertight, SideD 10' Watertight, SideF 15' Watertight, SideP 18" Watertight, EndQ 3' Watertight, EndR 6' Watertight, EndS 10' Watertight, EndT 15' Watertight, EndCode 7: OptionsBlank Noneavailable whenCode 4 is 0 thruG, and Code 6 is0 or 1:PSLEDOutputIndicator10 foot Cable Assemblies with MS Connector1400431-0010 7 Pin MS, Cable Assy. For Use with Single Ended w/Index Outputs108596-0010 7 Pin MS, Cable Assy. For Use with Differential Line Driver w/o Index Outputs1400635-0010 10 Pin MS, Cable Assy. For Use with Differential Line Driver with Index Outputs15 foot Cable Assemblies with M12 Connector112859-0015 5 Pin M12, Cable Assy. For Use with Single Ended Outputs112860-0015 8 Pin M12, Cable Assy. For Use with Single Ended Outputs112860-0015 8 Pin M12, Cable Assy. For Use with Differential Line Driver Outputs2.21