Heavy Duty Encoder - Hengstler Encoders

HEAVY DUTYSERIES HS56NorthStar brandHollow Shaft EncoderKey Features• Hollowshaft Design with Heavy-DutyBearings Ideal for TEFC AC Motor Mounting• Magneto-Resistive Technology• Accommodates Shaft Sizes from 5/8" to 1-1/8"• Stainless Steel and Anodized AluminumConstruction• Dual Isolated Outputs Available for RedundancySPECIFICATIONSSTANDARD OPERATING CHARACTERISTICSCode: IncrementalPulses per Revolution: 64-2048Phasing Sense: A leads B for Counter-Clockwiserotation (CCW) viewing encoder-mounted endQuadrature Phasing: 90° ± 22°Symmetry: 180° ± 54°Index: 270°, ungated (optional gated to falling B edge)ELECTRICALInput Voltage Requirement: 5-15 or 5-26 Volts DCCurrent Requirement:With Electrical Option L: 45 mA typical per sensormodule plus line driver loadWith Electrical Option V or 5: 65 mA typical persensor module plus line driver loadOutput Signals:With Elec Option L: 5-15 V Line Driver, 150mAWith Elec Option V: 5-26 V Line Driver, 100mAWith Elec Option 5: 5V Line Driver, 150mAFrequency Response: 0 - 120kHz Data & IndexElectrical Immunity: 2kV ESD, Reverse Polarity,Short CircuitConnector: 10 pin industrial duty latching, sealedNEMA 4 &12, IP65; MS connector or pig-tailEN 61326MECHANICALMating Shaft Sizes: 5/8” to 1-1/8”Shaft Speed: 3,600 RPMMounting Configuration: Hollow Shaft mount withAnti-Rotation TetherHousing Material: Hard Anodized AluminumW/Stainless Steel HubAcceleration Rate: 3,600 rpm/sec maxShaft Length Required: 2.0” minAllowable Shaft End-Play: ± 0.150” (tether limit)Allowable Shaft Runout: 0.015” TIR typical (rpmdependent)ELECTRICAL CONNECTIONSENVIRONMENTALOperating Temperature Range: -20°C to+80°CStorage Temperature Range: -40°C to +120°CHumidity: to 98% RH (non-condensing)Shock (Sensor Module): 1 meter drop test,30 G’s MinVibration: 18 G’s @ 5-2000 Hz spectrumSignal Connector Pin Pigtail Cable MS 3102E18-IT#CommonBAZ *No ConnectionVcc +—B—A—Z *Shield12345678910* Index (Z) optional. See Ordering InformationBlackGreenBlueViolet—RedYellowGrayOrangeBraidFBACEDIHJG1.58