Heavy Duty Encoder - Hengstler Encoders

yHEAVY DUTYSERIES H56Ordering InformationTo order, complete the model number with code numbers from the table below:Code 1: ModelH56Code 2: PPRCode 3: ShaftCode 4: FormatCode 5: ElectricalCode 6: TerminationCode 7: OptionsOrdering InformationH56 Mill Duty,56C-Face orFoot MountRotopulser ®00010002000300050006001000120025005000600064010001200128018002000240025003000360040005000512060006250720090010001024120012701500180020002048240025001 Single2 DoubleCompliments available whenCode 5 is 3 or 42 Single, bidirectionalquadrature (AB)3 Single, bidirectionalquadrature with index(ABZ)4 Dual, isolatedbidirectionalquadrature (dual AB)6 Dual, isolatedbidirectionalquadrature with index(dual ABZ)0 5-26V in, 5-26Vopen collector out1 5-26V in, 5-26Vopen collector outw/ 2.2kΩ pullups2 5-26V in, 5-26Vsingle endedpush-pull out3 5-26V in, 5Vdifferential linedriver out (7272)4 5-26V in, 5-26Vdifferential linedriver out (7272)5 5-26V in, 5VDifferential LineDriver out (4469)6 5-15V in, 5-15VDifferential LineDriver out (4469)0 MS Connector(s)1 MS Connector(s), plusmating connector(s)2 Pluggable screwterminal connector(s)3 Pluggable screwterminal(s), plusmating connector(s)available whenCode 6 is 0 or 1:PS LEDOutputIndicatorDIMENSIONS inches [mm]Code 3: ShaftPurge Plug Location1.18"(30 mm)0.59"(15 mm)1.62"(41.2 mm)PURGE PLUGS(2) 1/4 - 18 NPT2: DOUBLE(OPTIONAL)DOUBLE SHAFT8.69"(220.5 mm)1: SINGLEKEYWAY1.84" 1.50" x 0.188" x 0.094"(46.7 mm) (38.3 x 4.8 x 2.4 mm)4.50"(114.3mm)PURGE PLUGS(2) 1/4 - 18 NPT3.50 ± 0.003"(88.8 ± 0.8 mm)0.6246 + 0.0 - 0.0004" DIA.(15.9 + 0.0 - .01 mm)1.50"(38.1 mm)3.00"(76.1 mm)1.00"(25.4 mm)4 SLOTS0.34" WIDE x 0.90" LG.(8.6 mm WIDE x 22.9 mm LG.)Code 6: Termination0,1: MS ConnectorsShown with LED Output Indicator OptionCode 9: PS2,3: Pluggable Screw TerminalsCode 4: Format2,3: Single 4,6: Dual, Isolated0.54"(13.7 mm)8.98"(227.9 mm)6.0"(152.3 mm)0.54"(13.7 mm)PRIMARY6.5"(164.9mm)1/2" NPTPIPETHREADS3/8-16" x 0.62"DEEP(4) MTG. HOLESON 5-7/8" B.C.6.45"(163.7 mm)9.58"(515.1 mm)SECONDARY12.11"(307.3 mm)PRIMARY6.5"(164.9mm)SECONDARY3.5"(88.8 mm)3.5"(88.8 mm)3.5"(88.8 mm)2.50" 2.50"(63.4 mm) (63.4 mm)1/2" NPT PIPE THREADS1.33