Heavy Duty Encoder - Hengstler Encoders

yINDUSTRIAL DUTYSERIES HR26DIMENSIONSCode 3: MechanicalA: Flange with Pilot B: Flange without Pilot C: NEMA 42 FlangeMOUNTING SURFACE4 HOLES, .181 DIA.EQUALLY SPACED 90°APART ON A 2.952" DIA. B.C..120.27MOUNTING SURFACE4 HOLES, .181 DIA.EQUALLY SPACED 90°APART ON A 2.952" DIA. B.C..27MOUNTING SURFACE4 HOLES, .181 DIA.EQUALLY SPACED 90°APART ON A 2.952" DIA. B.C..2002.4392.4360.733.251.94REF.3.25 1.94REF.3.25 1.94REF.3.940 MAX3.940 MAX4.740 MAXMating shaft lengths: Typically: 0.5" max. available into the coupling as measured from the A/B mounting surface.1.3" max. available into the coupling as measured from the C mounting surface.Code 4: Output0 - 3: Format A 4 - 5: Format B6 - D: Format CG: Format DCCWCCWCWCCWAAAABBBBZZZZCode 6: Termination0: End MS Connector 1: Side MS Connector 2 - A: Side CableWhen Code 5 is 0 to 5 or A to GWhen Code 5 is 0 to 5 or A to G1.32"0.91"Max.2.18"2.18"2.76"Max.1.78"1.93"0: End M12 ConnectorWhen Code 5 is H to Z1: Side M12 ConnectorWhen Code 5 is H to Z0.58"0.58"2.18"1.75"1.93"2.57