Heavy Duty Encoder - Hengstler Encoders

HEAVY DUTYSERIES DWD38NorthStar brandHarsh Duty Optical EncoderKey Features• Draw Works Threaded Shaft with FieldReplaceable Adapters for Reduced Downtime• ATEX Certification Available for IntrinsicallySafe Requirements• Dual Isolated Outputs Available for Redundancy• Anodized Aluminum or Stainless SteelHousing• NAMUR Sensor Output AvailableE Ex ia IIB T41.24SPECIFICATIONSSTANDARD OPERATING CHARACTERISTICSCode: IncrementalResolution: 1 to 5000 PPR (pulses/revolution)Format: Two channel quadrature (AB) withoptional Index (Z), and complementary outputsPhase Sense: A leads B for CCW shaft rotationviewing the shaft clamp end of the encoderQuadrature Phasing: For resolutions to1200 PPR: 90° ± 15° electrical; For resolutionsover 1250 PPR: 90° ± 30° electricalSymmetry:For resolutions to 1024PPR: 180° ±18° electricalFor resolutions over 1024PPR: 180° ±25°electricalWaveforms: Squarewave with rise and fall timesless than 1 microsecond into a load capacitanceof 1000 pfELECTRICAL CONNECTIONSo(180 ELEC)Data AData AData BIndexNote: “MS” type mating connectors and prebuilt cables are rated NEMA 12.For watertight applications,use NEMA4 10 pin cable &connector 109209-XXXX.DATA AND INDEXNot all complements shown.A shown for referenceA Leads B CCW6, 7 & 10 Pin MS Connectors and CablesConnector & mate/accessory cable assembly pin numbers and wire color information is provided here forreference. Models with direct cable exit carry the color coding as shown in the right hand column.Encoder Cable # 108594- Cable # 108595- Cable # 108596- Cable # 1400635- or 109209- Cable ExitFunction 6 Pin Single Ended 7 Pin Single Ended 7 Pin Dif Line Drv w/o Idx (NEMA4) 10 Pin Dif Line Drv w/Idx with SealPin Wire Color Pin Wire Color Pin Wire Color Pin Wire Color Wire ColorSig. A E BRN A BRN A BRN A BRNBRNSig. B D ORG B ORG B ORG B ORGSig. Z C YEL C YEL — — C YELPower +V B RED D RED D RED D REDCom A BLK F BLK F BLK F BLKCase — — G GRN G GRN G GRNN/C F — E — — — E —Sig. ASig. BSig. Z— — — — C BRN/WHT H BRN/WHT— — — — E ORG/WHT I ORG/WHT— — — — — — J YEL/WHTORGYELREDBLK——BRN/WHTORG/WHTYEL/WHTo(90 ELEC)ELECTRICALInput Power: 5-26VDC; 50 mA max., notincluding output loads. ATEX: 5VDC, 5-26VDCOutputs: 2N2222, ET7272, ET7273Frequency Response: 125 kHz (data & index)Termination: 6, 7, or 10 pin MS Connector;18” cable exit w/sealMating Connector:6 pin, style MS3106A-14S-6S (MCN-N4);7 pin, style MS3106A-16S-1S (MCN-N5);10 pin, style MS3106A-18-1S (MCN-N6);10 pin, NEMA 4 style (604505 & 604506)MECHANICALShaft Sizes:1”-14 UNS x 5/8” - 18 UNF Threaded Shaft;1”-14 UNS Threaded Shaft;1”-14 UNS x 5/8” - 18 UNF Field ReplaceableThreaded ShaftShaft Material: 300 series stainless steelBore loading: Up to 20 lbs axial and radialBore runout: 0.0005 TIR at midpointStarting/Running torque: 4.5/4.0 in-oz.maximum (at 25°C)Bearings: 61806-ZZBearing life: 5 x 10 8 revs at rated shaftLoading,5 x 10 11 revs at 10% of rated shaftloading.(manufacturers’ specs)Housing and cover: Hard Anodized Aluminum.Also available in Electroless Nickel finish andStainless Steel.Disc material: Metal or plasticWeight: 35 ounces, typicalENVIRONMENTALOperating Temperature: -40 to 100°COperating Temperature ATEX: -40 to 80°CStorage temperature: -40 to 100°CShock: 400g for 6msec durationVibration: 5 to 3000Hz @ 20gHumidity: 100%Enclosure Rating: IP67