Heavy Duty Encoder - Hengstler Encoders

yHEAVY DUTYSERIES X25Code 1: ModelX25Ordering InformationTo order, complete the model number with code numbers from the table below:Code 2: Pulses/Rev Code 3: Mechanical Code 4: OutputCode 5: ElectricalX25ExplosionProof,ShieldedBearings withShaft Seal00010005001000120025005000600086010001200180020002400250025402560300036004000500051206000635072007680800090010001024120012501270150016001800196820002048240025002540300034003600375040004096480050000 3/8" Shaft1 1/4" Shaft0 Single Ended, no index,Format C1 Single Ended, with index,Format C2 Differential, no Index,Format C3 Differential, with index,Format C4 Single Ended, with index,Format A5 Differential, with index,Format A0 5-26V in; 5-26V OpenCollector with 2.2kΩPullup out1 5-26V in; 5-26V OpenCollector out2 5-26V in; 5V TotemPole out3 5-26V in; 5V LineDriver out4 5-26V in; 5-26V LineDriver outDIMENSIONSApproximate Dimensions (in inches)1.272 0.295 DIA.(4) HOLESFLAT1.125 1/2–14 NPTF(5 THREADS MIN.)2.371.25001.24950.75 SQ.0.3747SHAFT3.3751.6870.200.300.301.854" SQ.1.1954.805.65Terminal Board ConnectionsZ Z C +VTB1B B A A GScrew terminals with pressure plates thataccept #14 AWG to #22 AWG.TB21.35