Heavy Duty Encoder - Hengstler Encoders

yINDUSTRIAL DUTYSERIES HC25DIMENSIONSCode 3: Mechanical0,2: Flange 1,3: 2.5" Servo 4,5: 2.5" Servo 6,7: 2.5" Servo 8,9: 2.62" Servo1.2500"1.2495"2.064"+ +0.30"3/8" Dia.(.03" Dp x .80" Lg Flat)or1/4" Dia. Round2.500"2.500"2.500"2.625"(4) 0.22"+ +2.66" SQ0.28"1.21"Note: Flat provided on 3/8" shaft(4) #4-40 UNC-2Bx 0.19" DEEP@ 2.000" B.C.(3) #6-32 UNC-2Bx 0.19" DEEP@ 2.000" B.C.(3) #10-32 UNC-2Bx 0.19" DEEP@ 1.875" B.C.0.30"(3) #10-32 UNC-2Bx 0.19" DEEP@ 1.875" B.C.3/8" Dia.(.03" Dp x .80" Lg Flat)or1/4" Dia. Round.91"2.50" 2.31"3/8" Dia.1.2500"1.2495"Code 4: Output0 - 3: Format A 4,5: Format B 6 - D: Format C G: Format DCCWCCWCWCCWAAAABBBBZZZZCode 6: Termination0.27"0.30"0.10"0.10"1.21"2.500"2.498"3/8" Dia.(.03" Dp x .80" Lg Flat)or1/4" Dia. Round0.125"0.125"Note: Flat provided on 3/8" shaft2.625"0: End MS Connector 1: Side MS ConnectorWhen Code 5 is 0 to 6 or A to G0: End M12 Connector 1: Side M12 ConnectorWhen Code 5 is H to Z1.49"1.45"0.54"0.58"0.58"0.54"ABZABZ3.30"1.91"1.75"1.91"1.66"Code 6: 0 & 1 dimensions shown withLED Output Indicator Option (Code 7: PS)1.66"2 - 6: Side Cable J - N: End Cable1.25"0.11"A - F: Side W.T. Cable0.80"1.49"P -T: End W.T. Cable0.80"1.66"1.91"1.50"1.75"1.91"1.66"2.23