Heavy Duty Encoder - Hengstler Encoders

yCode 1: ModelS6S6 MotorMount Ring, for4 1/2" NEMA56-C C-FaceMotors orReliance ElectricStyle 6.75"RecessOrdering InformationTo order, complete the model number with code numbers from the table below:Code 2: PPR Code 3: Index Code 4: Wheel Bore Code 5: Termination Code 6: Electrical006401280256051210242048LNo IndexAvailable whenCode 2 is 0512,1024 or 2048GZGatedIndex (Z, — Z)DifferentialIndex (Z, — Z)Ordering Information5/8" bore C Latching7/8" boreIndustrialConnector with1.00" bore1/2” NPT1-1/8" boreM 10 pin MS1-3/8" boreConnector1-1/2" boreP 18” pigtail cable1-5/8" bore1-3/4" bore Q LatchingIndustrial1-7/8" boreConnector on 18”2.00" borepigtail cable2-1/8" bore2-1/4" bore2-3/8" bore2-1/2" bore2-7/8" boreJ04J05J06J07K09K10K11K12K13K14K15K16K17K18K19Additional ShaftSizes AvailableUp to 3.75"MaximumL 5-15V in, 5-15VLine Driver(4428) outH Same as L withextended temp. to120°CV 5-26V in, 5-26VLine Driver (IC-WE) out5 5-15V in, 5V LineDriver (4428) outDifferential,bidirectional signals(A, — A, B, — B)HEAVY DUTYSERIES RL67Code 7: CoverC Standard coverF Flat Thru-hole coverNote: See ACCESSORIES Section For Connectors, Spare Parts and Pulse WheelsDIMENSIONS inch[mm]2.08[52.9]C-DECODE:INDUSTRIALLATCHING CONNECTORP-DECODE:18" PIGTAILSEE "Q"OPTION BELOW7.36 [187.1]45°10.86 [275.8]2X 1/4-20 UNCCOVER SCREWSØ 4.500[114.30] Ø 6.75[171.4]Ø 4X 3/8-16 UNCON 5.88 [149.2]BOLT CIRCLE3.50[88.8]PLEASE REFER TO NORTHSTARPULSE WHEEL PAGE("J" SERIES WHEEL IS SHOWN)3.50[88.8]PLEASE REFER TONORTHSTARCOVER PAGE1.92[48.7]0.38 [9.5]1.27 [32.3]1.33 [33.9]"Q" OPTION3.50 [88.9]3.47 [88.2]1.50 [38.1]0.75 [19.1]4X COUNTERBOREFOR 1/4 SHCS1.45