Heavy Duty Encoder - Hengstler Encoders

yHEAVY DUTYSERIES HS85Ordering InformationTo order, complete the model number with code numbers from the table below:Code 1: ModelH8Code 2: PPRCode 3: IndexCode 4: Wheel BoreCode 5: OutputCode 6: ElectricalCode 7: TerminationH8 HollowShaft0060006400750120012801500240025603000480051206000960102412002048LNo IndexAvailable whenCode 2 is 0480,0512, 0600,0960, 1024,1200 or 2048GZGatedIndex (Z, — Z)DifferentialIndex (Z, — Z)Ordering InformationThru-bores1 SingleT01 1-1/8" bore 2 Dual (Isolated)T02 1-3/8" boreT03 1-5/8" bore Differential,T04 1-7/8" bore bidirectionalT05 2.00" bore signalsT06 2-1/8" bore (A, — A, B, — B)T07 2-1/4" boreT08 2-3/8" boreT09 2-1/2" boreT10 2-7/8" boreL 5-15V in, 5-15VLine Driver (4428) outR 15-26V in, 15VLine Driver (4428) out5 5-15V in, 5VLine Driver (4428) outC Latching IndustrialConnector with 1/2" NPTM 10 pin MS ConnectorP 18" PigtailNote: See ACCESSORIES Section ForConnectors, Spare Parts and Pulse WheelsDIMENSIONS inch[mm]Bores with 1.25" perfoot taperP01 1-1/8" boreP02 1-3/8" boreP03 1-5/8" boreP04 1-7/8" boreP05 2.00" boreP06 2-1/8" boreP07 2-1/4" boreP08 2-3/8" boreP09 2-1/2" boreP10 2-7/8" boreAdditional Shaft SizesUp to 4.50" MaximumAvailable (thru andtaper shaft)Call factory for details7.75±.25[196.85±6.35].375X24 UNFTIGHTEN TO 20FT-LBS (REF)0.87 [22.1]8X M4-0.7X20 SOCKET HEAD SCREWTIGHTEN TO 15IN-LBF (REF)ANTI-ROTATIONAL ARM1/2" NPTCONDUIT CONNECTION2.13 [54.1]8.71 [221.23]SECOND OUTPUT(OPTIONAL)15.92[404.37]12.31[312.67]7.96[202.18]2.62[66.55]0.16[4.06]REFER TO ORDERING INFORMATIONFOR AVAILABLE BORE SIZES.1.63