Heavy Duty Encoder - Hengstler Encoders

INDUSTRIAL DUTYSERIES HR26Dynapar brandELECTRICAL CONNECTIONSPrewired Cable or Accessory Cables with 7 or 10 Pin MS Connector - when Code 4= 0 to 5, or A, B, C, D or GNote: Wire color codes are referenced here for models that are specified with pre-wired cable. Connector/cables are describedin the Encoder Accessories section of this catalog and color-coding information is provided here for reference.Table 1 – Single EndedWireFunction ColorPin (If Used) CodeA Signal A BRNB Signal B ORNC Signal Z YELD Power Source REDE No Connection —F Common BLKG Case GRNCableAccessoryColor CodeREDBLUEYELWHTGRNBLKSHIELDCable Accessory: P/N 14004310010PinTable 2 – DifferentialWireFunction Color(If Used) CodeA Signal A BRNB Signal B ORNC Signal Z YELD Power Source REDE No Connection —F Common BLKG Case GRNH Signal A BRN/WHI Signal B ORN/WHJ Signal Z YEL/WHCable Accessory: P/N 14006350010CableAccessoryColor CodeBRNORNYELRED—BLKGRNBRN/WHORN/WHYEL/WHCable Configuration: PVC jacket, 105 °C rated, overall foil shield; 3 twistedpairs 26 AWG (output signals), plus 2 twisted pairs 24 AWG (input power)Connector pin numbers and cable assembly wire color information isprovided here for reference.Table 4 Table 5 Table 65 Pin Single Ended 8 Pin Single Ended 8 Pin DifferentialEncoderFunction Cable # 112859-* Cable # 112860-* Cable # 112860-*Pin Wire Color Pin Wire Color Pin Wire ColorSig. ASig. B†Sig. ZPower +VComSig. A–Sig. B–†Sig. Z– 42513–––BLKWHTGRYBRNBLU–––14627–––BRNORGYELREDBLK–––14627358BRNORGYELREDBLKBRN/WHTORG/WHTYEL/WHTCable Configuration: PVC jacket, 105 °C rated, overall foilshield; 24 AWG conductors, minimum*Note: Standard cable length is 10 feet but may be ordered in any length in5 foot increment. For example, -0020 is a 20 foot cable.†Note: Index not provided on all models. See ordering informationSee “Accessories” Section for Connectors and Cable Assemblies Ordering Information2.56