Heavy Duty Encoder - Hengstler Encoders

yHEAVY DUTYSERIES R25Ordering InformationTo order, complete the model number with code numbers from the table below:Code 1: ModelR25R25 Heavy-duty,resolverCode 2: MountingF FlangeS ServoCode 3: Connector TypeB MS3102E-16S-1PC MS3102E-18-1PF FLYING LEADSG MS3112E-10-6PL MS3112-18-11PP PT02E-14-19-PCode 4: Conn. Exit Code 5: ShaftOrdering InformationR Rear Exit R RoundS Side Exit F Roundwith flatW Roundwith 2flats @ 90degreesCode 6: SealY ShaftSealN No ShaftSealCode 7: Elec. Parts KitAvailable whenCode 8 is 07 to 201A 1E 1J1B 1F 1K1C 1H 1M1DAvailable whenCode 8 is 04 to 102AAvailable whenCode 8 is 02 to 103A 3BCode 8: Accuracy02 2 arc min03 3 arc min04 4 arc min05 5 arc min07 7 arc min10 10 arc min2S 20 arc minSpread15 15 arc min20 20 arc minCode 9: Special0 000 FactoryAssignedDesignatorDIMENSIONS inches [mm] MS3106F-16S-1S Connector2.51[63.75]Max.Ø 2.53[64.3]2.55 [64.8] Max.3.75 [95.25] Max.Note: Dimensions are dependent on Connector type - Shown with B = MS3102E-16S-1PMS3106F-18-1S ConnectorAccessories:CA-18-R-0010 10 ft.cable with MS3106F-18-1S ConnectorCA-16-R-0010 10 ft.cable with MS3106F-16S-1S ConnectorNote: Part numbers listed with -0010 are for 10 Foot Cable;use -0050 for 50 Foot Cable, etc1.71