Heavy Duty Encoder - Hengstler Encoders

LIGHT DUTYSERIES E14ICDynapar brandMiniature EncoderKey Features• Integrated coupling and “top-hat” forsimple installation• Compatible with NEMA size 23 and 24motors• Optional differential line driver outputsSPECIFICATIONSSTANDARD OPERATING CHARACTERISTICSCode: IncrementalResolution: 100 to 2540 PPR (pulses/revolution)Format: Two channel quadrature (AB) withoptional Index (Z) outputsPhase Sense: A leads B for CW shaft rotation asviewed from the shaft end of the encoder;Reverse phasing available, see Ordering InformationAccuracy: ±3 x (360° ÷ PPR) or ± 2.5 arc-minworst case pulse to any other pulse, whichever islessQuadrature Phasing: 90° ± 36° electricalSymmetry: 180° ± 18° electricalIndex: 90° ± 25° (gated with A and B high)Waveforms: Squarewave with rise and fall timesless than 1 microsecond into a load capacitance of1000 pfElectrical ConnectionsWireColor CodeRedBlackWhiteGreenOrangeBlueShieldWhite/BlackRed/BlackSingle EndedOutputsPower SourceCommonSignal ASignal B (if used)Signal Z (if used)No ConnectionFloating————ELECTRICALInput Power:5 VDC ± 5% at 80 mA max.;12 or 15 VDC ± 10% at 80 mA max.; not includingoutput loadsOutputs:7272 line driver (or equivalent), 40 mA sink andsourceFrequency Response: 100 kHz min.FunctionDifferential OutputsUnidirectional BidirectionalPower Source Power SourceCommonCommonSignal A_Signal ASignal ASignal_BNo ConnectionSignal B_No ConnectionSignal AFloatingFloating——Signal Z_(if used)——Signal Z (if used)DB 25ConnectorPin Number23141342856MECHANICALBearing Life: (16 x 10 6 ÷ RPM) hours min.Shaft Speed: 5,000 RPM max.Starting Torque: 0.1 oz-in max. at 25 °CRunning Torque: 0.08 oz-in max. at 25 °CMoment of Inertia: 3.8 x 10 –5 oz–in–sec 2Weight: 7.0 oz. max.ENVIRONMENTALOperating Temperature: 0 to +70 °CStorage Temperature: –25 to +70 °CHumidity: to 98% without condensationEnclosure Rating: NEMA12/IP54 (dirt tight,splashproof)4.12