12.07.2015 Views

Heavy Duty Encoder - Hengstler Encoders

Heavy Duty Encoder - Hengstler Encoders

Heavy Duty Encoder - Hengstler Encoders

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

HEAVY DUTYSERIES HSD25NorthStar brandHarsh <strong>Duty</strong> Optical <strong>Encoder</strong>Key Features• Compact Hubshaft Design with FieldReplaceable Shaft Isolators• Unbreakable Code Disc up to 3600PPR• ATEX Certification Available for IntrinsicallySafe Applications• IP67 Sealing• Anodized Aluminum, Stainless Steel, orNickel Plated HousingE Ex ia IIB T4SPECIFICATIONSSTANDARD OPERATING CHARACTERISTICSCode: IncrementalResolution: 1 to 3600 PPR (pulses/revolution)Format: Two channel quadrature (AB) withoptional Index (Z), and complementary outputsPhase Sense: A leads B for CCW shaft rotationviewing the shaft clamp end of the encoderQuadrature Phasing: For resolutions to 625PPR:90° ± 15° electrical; For resolutions over625 PPR: 90° ± 30° electricalSymmetry:For resolutions to 1024PPR: 180° ±18° electricalFor resolutions over 1024PPR: 180° ±25° electricalWaveforms: Squarewave with rise and fall timesless than 1 microsecond into a load capacitanceof 1000 pfELECTRICALInput Power: 5-26VDC. 50 mA max., notincluding output loads. ATEX: 5VDC, 7-26VDCOutputs: 2N2222. ET7272, ET7273Frequency Response: 125 kHz (data & index)Termination: 6, 7, or 10 pin MS Connector;5 or 8 Pin M12 Connector; Cable exit w/sealMating Connector:6 pin, style MS3106A-14S-6S (MCN-N4)7 pin, style MS3106A-16S-1S (MCN-N5)10 pin, style MS3106A-18-1S (MCN-N6)10 pin, NEMA 4 style (604505 & 604506)MECHANICALShaft Material: 303 stainless steel (passivated)Bore Diameter: 3/8”, 10mm, 1/2”, 5/8”, 3/4”.Insulated inserts providedBore runout: 0.0005 TIR at midpointStarting torque: 6.5 in-oz. maximum (at 25°C)DATA AND INDEXNot all complements shown.A shown for referenceo(180 ELEC)Data AData AData BIndexA Leads B CCWo(90 ELEC)Bearings: 61805-2RZBearing life: 5 x 10 8 revs at rated shaftLoading,5 x 10 11 revs at 10% of rated shaft loading.(manufacturers’ specs)Housing and cover: Hard AnodizedAluminum. Also available in ElectrolessNickel finish and Stainless Steel. TetherAvailableDisc material: Metal or plasticWeight: 20 ounces, typicalENVIRONMENTALOperating Temperature: -40 to 100°COperating Temperature ATEX: -40 to 80°CStorage temperature: -40 to 100°CShock: 50G’s for 11msec durationVibration: 5 to 2000Hz @ 20 G’sHumidity: 100%Enclosure Rating: IP671.08

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!