Heavy Duty Encoder - Hengstler Encoders

HEAVY DUTYSERIES HSD44NorthStar brandExtreme Heavy Duty EncoderKey Features• O-Ring Housing with Pilot Seals AgainstMotor for the Ultimate in Protection• Isolated Coupling Compensates for MotorShaft Runout and Endplay• Perfect for Off-Highway Vehicle Applicationswith High Shock and Vibration• Unbreakable Code DiscSPECIFICATIONSSTANDARD OPERATING CHARACTERISTICSCode: IncrementalResolution: 1024 PPR (pulses/revolution),Others at special orderFormat: Two channel quadrature (AB) withIndex (Z), and complementary outputsPhase Sense: A leads B for CCW shaft rotationviewing the shaft clamp end of the encoderQuadrature Phasing: 90° ± 15° electricalSymmetry: 180° ± 18° electricalWaveforms: Squarewave with rise and fall timesless than 1 microsecond into a load capacitanceof 1000 pfElectrical Immunity: 50 Meg ohm minimumencoder shaft/frame to all connector pinsDATA AND INDEXNot all complements shownA shown for reference(180° ELECData AData AData BIndex(90° ELEC)A leads B, CCW (From Clamp End)ELECTRICALInput Power: 5-30VDC. 50 mA max., not includingoutput loads.Outputs: 5 -30 Volts DC, TTLFrequency Response: 125 kHz (data & index)Termination: 18” pigtail or 18” pigtail with MSConnector. See Ordering InformationMating Connector:10 pin MS, style MS3106A-18-1S (MCN-N6)ELECTRICAL CONNECTIONSFunctionSig. ASig. BSig. ZPower +VCom.CaseN/CSig. ASig. BSig. ZPinABCDFGEHIJWire ColorBRNORGYELREDBLKGRN—BRN/WHTORG/WHTYEL/WHTMECHANICALMechanical Interface: Electrically isolatedstainless steel shaft flex couplingMating Shaft Length: 0.47” to 0.625” (11.9mmto 15.9mm)Coupling: 16mm or 5/8”, flexibleShaft Speed: 6000 RPM, max.Bearings: 6107Bearing life: 5 x 10 8 revs at rated shaft Loading,5 x 10 11 revs at 10% of rated shaft loading.(manufacturers’ specs)Housing Material: Aluminum Alloy, BlackAnodizedDisc material: Stainless steelWeight: 4 lbs.ENVIRONMENTALOperating Temperature: -40 to 100°CStorage temperature: -40 to 100°CShock: 400g, 6mSecVibration: 5-3000 Hz, 20gHumidity: 98%, non-condensingEnclosure Rating: NEMA 61.26