NanoLC 1D Plus and 2D System Operator's Manual - Eksigent

More documents

Recommendations

Info

58 Operator’s Manual6.5 Error Messages and System AlertsSystem alerts can be displayed by selecting View > System Logs > Alerts. These alerts (Figure 6-4) arereminders of an action that needs to be taken; such as to run the diagnostic tests or refill the reagentstorage loops. Pressing Clear Alerts will erase all alerts. Note: that this does not mean that therecommended alert action has been completed.Figure 6-4. System Alerts WindownanoLC Operator’s Manual 611-00012 Revision A1
Appendix ASpare Parts and ConsumablesA.1 Consumables: nanoLC-1D+ and nanoLC-2Dpart numberdescription800-00006 Accessories kit for 1D. Includes calibration kit, syringe, fittings, capillary tubing and cables.801-00025 Accessories kit for 1Dplus and 2D. Includes mobile phase reservoirs, calibration kits, priming tool and syringe,fittings, capillary tubing and cables.801-00002 Flow rate calibration kit with 20 μL calibrated pipettes (10) for 1 – 30 μL/min flow rate801-00020 Replacement calibration pipettes, 20 μL, for 1-30 μL/min, 10/pkg801-00006 Flow rate calibration kit with 5 μL calibration pipettes (5) for 50 – 1000 nL/min flow rate910-00007 Replacement calibration pipettes, 5 μL, for 50 – 1000 nL/min, 10/pkg801-00003 Pump priming tool kit, includes 10 mL syringe (1D)910-00020 Fitting, FingerTight, 1/16”, PEEK, 10/pkg910-00021 Fitting, hex, 1/16”, SS, 0.43” long, 10/pkg920-00006 PEEK hex nut, 10/pkg910-00023 Ferrule, 1/16”, PEEK, 10/pkg910-00026 Ferrule, 1/16”, SS, 10/pkg920-00004 Fitting, hex, 1/16", SS, 3/4" long, 10/pkg920-00005 Fitting, hex, 1/16”, PEEK, ¾” long, 10/pkg920-00008 Sleeve, FEP, green, 395 μm ID, 1/16" OD, 10/pkg200-00165 Fitting, NanoTight 1/16”, PEEK, 0.90” long, with Tefzel ferrule910-00022 Fitting, MicroTight, 0.025”, PEEK, 10/pkg920-00002 Ferrule, MicroTight, for 0.025", 10/pkg200-00002 MicroTight union, PEEK200-00044 Plug, MicroTight, PEEK, black920-00003 Nut, female, MicroTight, 10/pkg910-00043 Sleeve, PEEK, yellow, 180 μm ID, 0.025" OD, 10/pkg910-00024 Sleeve, PEEK, orange,405 μm ID, 1/16" OD, 10/pkg910-00025 Sleeve, PEEK, green, 395 μm ID, 0.025" OD, 10/pkg200-00138 Mixing tee ferrule for 365 μm OD capillary, 1/pkgnanoLC Operator’s Manual 611-00012 Revision A1
Page 1 and 2:
operator’s manualplus systemsyste
Page 3 and 4:
iiiTable of ContentsChapter 1. Safe
Page 5 and 6:
Chapter 1.Safety and Site Requireme
Page 7 and 8:
Safety and Site Requirements 3Do no
Page 9:
1.4.4 Bench Space RequirementSafety
Page 12 and 13: 8 Operator’s Manualstep 5step 6st
Page 14 and 15: 10 Operator’s Manual2.7 Installin
Page 16 and 17: 12 Operator’s ManualFigure 2-8. I
Page 18 and 19: 14 Operator’s ManualFigure 2-11.
Page 20 and 21: 16 Operator’s ManualRequired tool
Page 22 and 23: 18 Operator’s ManualHold down the
Page 25 and 26: System Initialization 21step 5step
Page 28 and 29: 24 Operator’s Manual4.2 Disposing
Page 30 and 31: 26 Operator’s ManualFigure 4-1. D
Page 32 and 33: 28 Operator’s ManualFigure 4-4. A
Page 34 and 35: 30 Operator’s ManualFigure 4-8. F
Page 37 and 38: Chapter 5.Quick-start GuideChapter
Page 39 and 40: Quick-start Guide..35CloseLoosenGri
Page 41 and 42: 5.4 Creating an Autosampler MethodQ
Page 43 and 44: Quick-start Guide..39Table 5.1. Tem
Page 45 and 46: step 2 To create a new method, type
Page 47 and 48: Quick-start Guide..43step 11 The mo
Page 49 and 50: Quick-start Guide..45step 10 Use th
Page 51: Quick-start Guide..47Figure 5-17. A
Page 54 and 55: 50 Operator’s Manual6.2 Calibrati
Page 56 and 57: 52 Operator’s Manual6.4 Troublesh
Page 58 and 59: 54 Operator’s ManualTable 6-1. (c
Page 60 and 61: 56 Operator’s ManualAutosampler
Page 64 and 65: 60 Operator’s ManualA.2 Replaceme
Page 67 and 68: Appendix BExternal InterfaceB.1 Int
Page 69 and 70: External Interface 65B.2 Valve Conn
Page 71: External Interface 67B.3.3 Triggeri
Page 74 and 75: 70 Operator’s ManualFigure C-2 sh
Page 76 and 77: 72 Operator’s ManualFigure C-4 sh
Page 78 and 79: 74 Operator’s ManualSelect: Autos
Page 80 and 81: 76 Operator’s ManualDefault metho
Page 82 and 83: 78 Operator’s ManualRun in Synchr
Page 89 and 90: IndexFlow Rate Verification, 21AFlo
show all

NanoLC 1D Plus and 2D System Operator's Manual - Eksigent

Create successful ePaper yourself

Delete template?

Save as template?