Untitled - Flannery Plant Hire

OPERATOR'S STATIONOPENING/CLOSING OVERHEAD WINDOW(Std. Model)1Opening1. Move lock levers (1) toward center of window.2. Hold handle (2) and lift window until it rises upright.With the window positioned upright, it will be securedin position by dampers (3).Closing21. Hold handle (2) and pull window down until “click”sound is heard from locks (1).M178-01-059Note that the overhead window can be used as anemergency exit.3OPENING/CLOSING OVERHEAD WINDOW(Clear Hatch: If Equipped)Opening1. Move lock levers (1) toward center of window.2. Hold handle (2) and lift window until it rises upright.With the window positioned upright, it will be securedin position by dampers (3).1M178-01-062Closing1. Hold handle (2) and pull window down until “click”sound is heard from locks (1).2Note that the overhead window can be used as anemergency exit.IMPORTANT:• Replace the clear hatch with a new one every 5years even if undamaged. In case it was remarkablydamaged or has received severeshock loads, replace it even if it has been notin use for 5 years.• When cleaning the clear hatch, use a neutraldetergent. If acidic or alkaline detergent is used,the clear hatch may become discolored orcrack.• Keep organic solvent away from the clearhatch. Failure to do so may cause the clearhatch to become discolored or crack.3M178-01-059M178-01-0621-57