Untitled - Flannery Plant Hire

OPERATOR'S STATIONStation Presetting Procedure1. Select the desired station using tuning switches (5).(Refer to the “Tuning Procedure” section.)2. Press and hold one station preset (4) for more than 2seconds until an electronic tone is heard. Now, theselected station is preset for the selected stationpreset. The frequency of the preset station will be indicatedon digital display (7).75Once the presetting is complete for a station preset (4),the radio will be tuned to the preset station when stationpreset (4) is pressed (for less than 2 seconds).4M157-01-027DIGITAL CLOCK SETTING PROCEDURENOTE: In order to set the clock, digital display (7) mustbe in the time display mode.7 61. Press and hold display mode change switch (6).While holding display mode change switch (6), usetime set switches (8) and/or set switch (9) to set theclock.The functions of time set switches (8) and set switch(9) are as follows:• Time Set Switch (H): Each time set switch (H) ispressed, the hour display will increase by one.• Time Set Switch (M): Each time set switch (M) ispressed, the minute display will increase by one.(The time is displayed in 12 hour standard.)89M157-01-027If either of the switches (H) or (M) is pressed andheld, the hour or minute display will change continuouslyuntil the switch is released.• Set Switch (SET) (9): If set switch (SET) (9) ispressed, the minute display will be reset to “00.”• If the minute display is “29” or smaller when setswitch (SET) (9) is pressed, the display will be resetto “00” without changing the hour display.• If the minute display is “30” or larger when setswitch (SET) (9) is pressed, the hour display will beincreased by one and the minute display will be resetto “00.”For example, if set switch (SET) (9) is pressed whenthe clock display is “10:29” and “10:30”, the clock displaywill change to “10:00” and “11:00” respectively.1-51