Untitled - Flannery Plant Hire

MAINTENANCECAUTION: Use reduced compressedair pressure (less than 0.2 MPa, 2 kgf/cm 2 ) forcleaning purposes. Clear the area of bystanders,guard against flying chips, and wear personalprotection equipment including eye protection.CleaningClean both the external and internal filters by blowingcompressed air or washing with water.When washing the filters with water, follow the proceduresbelow:1. Wash with tap water.2. Soak the filters in neutral detergent-mixed water forapprox. 5 minutes.3. Wash the filters with water again.4. Dry the filters.Rear Side of CabArrowInstallationWhen installing the cleaned recirculation and/or ventilationfilter or new filters, follow the reverse order of theRemoving Filter procedures described on the front page.• Fresh Air FilterUse attention when installing the filter so that thenotch faces the back of the cab and the stamped arrowsface the air conditioner unit. After installing thefilter, install the upper cover while aligning it with theduct.• Recirculation FilterWhile contacting the attached filter plate onto the duct,install the filter so that the clips align with the ductmounting holes.PlateAir Conditioner SideM157-14-022M178-07-0717-82