Untitled - Flannery Plant Hire

TRIP METER(TRIP METER 1 AND TRIP METER 2)OPERATOR'S STATIONThe remaining hours [h] of operation before the trip markstart flashing is displayed. (Refer to page 1-18.) During TripMeter display, the trip mark (either [TRIP 1] or [TRIP 2]) isindicated on the screen.34MCBB-01-012Trip MarkWhen Trip Meter 1 is displayed:M178-01-007Trip MarkENGINE SPEEDThe LCD displays the engine speed in min -1 . During EngineSpeed display, the engine speed mark and unit [min -1 ]are indicated at the bottom of the screen.EngineSpeedMarkWhen Trip Meter 2 is displayed:M178-01-008Control ModeIndicationHYDRAULIC OIL TEMPERATUREThe LCD displays the hydraulic oil temperature in !C. DuringHydraulic Oil Temperature display, unit [!C] is indicatedat the bottom of the screen.When Engine Speed is displayed:Control Mode IndicationM1G6-01-009NOTE: While displaying either ENGINE SPEED orHYDRAULIC OIL TEMPERATURE, the lettersof “USER” is indicated on the screen. This isnot trouble but shows the current monitor controlmode of the LCD.Hydraulic OilTemperatureMarkM1G6-01-010When Hydraulic Oil Temperature is displayed:1-17